1:
|
Anyone know the thread size on KYB rear struts for 88GT?
(Technical Discussion & Questions - by phils88GT, started: 03-09-2024, last post: 2024-03-10 19:43:17 CET)
So I finally got to the point where I am fixing up my DD 88GT. I ordered a set of front KYB front shocks and rear struts and started on the driver side rear today. I got the driver side done, no problem. Went to the passenger side rear and this is where I screwed up.I accidentally put the old...
Score: 775, Size: 66 bytes
|
2:
|
coolant pipe drain plug thread size.
(Technical Discussion & Questions - by AL87, started: 02-04-2014, last post: 2020-11-26 07:38:03 CET)
wondering what the thread size is for the drain plugs.
Score: 775, Size: 41 bytes
|
3:
|
2.8 oil pressure sending unit Thread size
(Technical Discussion & Questions - by jjd2296, started: 10-04-2020, last post: 2020-10-04 18:09:47 CEST)
Anyone know off hand what the thread size is on the 2.8/3.4 block for the oil pressure sending unit? I need to find a copper t adaptor so I can run an oil feed line to my supercharger that is being mounted in the ac compressor location.
Score: 775, Size: 50 bytes
|
4:
|
Bolt or Thread size for stock air cleaner support bracket
(Technical Discussion & Questions - by Rjberner46, started: 09-13-2020, last post: 2020-09-16 06:17:42 CEST)
Does anyone know the bolt thread size for the air cleaner canister support bracket?
Score: 775, Size: 68 bytes
|
5:
|
What size of the tap to chase the threads on the block for the cylinder heads
(Technical Discussion & Questions - by Zentaury, started: 06-19-2020, last post: 2020-06-19 21:56:33 CEST)
Hello, I am going to put back together my 1985 Fiero GT 2.8L.Before I had planned to rent a set of taps in the local store but due to the pandemic they are not renting for now.I have to buy the tap but I don’t want to choose the wrong one.I looked the FSM, Haynes and Chilton but they only tell...
Score: 775, Size: 86 bytes
|
6:
|
Thread size on brake pedal brake light switch ?
(Technical Discussion & Questions - by ltlfrari, started: 08-27-2015, last post: 2019-06-15 19:40:58 CEST)
My brake light switch (part num D850a) has come out of the little clip that holds in place and does not seem to want to stay put when I put it back.Just in case I cannot fix the clip and/or get he switch to stay where it needs to be I was thinking of using a couple of jam nuts on the threaded part...
Score: 775, Size: 56 bytes
|
7:
|
Thread size for fuel pressure regulator bolts into fuel rail?
(Technical Discussion & Questions - by dremu, started: 03-14-2019, last post: 2019-03-18 16:00:14 CET)
Broke one of the tiny bolts (about an M4 or #6) holding down the FPR. I can drill it out, fill and re-tap the hole, but can't for the life of me figure the thread size. M4-.7 seems too big, and #6-32 too coarse (plus I'm thinking it should be metric.)Any takers?-- A[This message has been edited by...
Score: 775, Size: 67 bytes
|
8:
|
Thread size of brake caliper banjo bolt??
(Technical Discussion & Questions - by Dennis LaGrua, started: 05-03-2018, last post: 2018-05-05 03:37:36 CEST)
Tried to fix a small leak at the banjo bolt on the rear caliper. Installed new copper crush washers and tightened gently. Bolt hole thread still stripped out. The caliper is in working condition so its now on to using a Helicoil kit but not sure of the banjo bolt thread size. Does anyone know what...
Score: 775, Size: 55 bytes
|
9:
|
V6 TPS screw thread size
(Technical Discussion & Questions - by pmbrunelle, started: 03-22-2018, last post: 2018-03-24 05:43:57 CET)
Anyone know what it is? I want to replace my stock screws with steel ones that won't break.Seems like M4.5 x 0.75mm to me... which is a real bastard size.This is on my 1985 Fiero.The screws have Philips heads.Here, M5 x 0.8mm (much more standard) is...
Score: 775, Size: 35 bytes
|
10:
|
Bolt size and thread question alternator
(Technical Discussion & Questions - by thebigarniedog, started: 10-13-2015, last post: 2017-12-20 03:20:02 CET)
What is the size of the top bolt that holds the alternator onto the bracket on a 2.8 engine? and what is the thread style? Thanks
Score: 775, Size: 55 bytes
|
|
Put a PFF Search Box on your Site!