|
|
1:
|
for the 4.9 cadilac engine swap?
(by Fastback88, started: 03-14-2024, last post: 2024-03-15 10:57:52 CET)
I bought a Fiero with the 4.9 Cadillac engine and the fuel pump is not working my question is what fuel pump should I use, stock Fiero that comes on Rodney's sender? or do I need something different? I did a search and could not find the info needed.
Score: 633, Size: 43 bytes
|
2:
|
My 4.9 wiring thread
(by Mickey_Moose, started: 02-02-2009, last post: 2023-02-11 15:25:23 CET)
See Rockcrawls site for info on the engines mounts: http://www.fieroaddiction.com/caddy49c.html Note: please PM stickpony for ECM programming (VATS/etc) [/shameless plug]Lately I have been asked a lot of questions, so here is all the info that I use in 1 location:These notes apply to a 86 coupe...
Score: 633, Size: 33 bytes
|
3:
|
4.9 Auto bracket mount kits?
(by Notchback Noob, started: 05-28-2022, last post: 2022-05-30 02:25:49 CEST)
Hello All,I'm getting ready to put in my 4.9 with its accompanying 4T60E. Screwed up and waited too long and now Johns 49 performance is no longer around. Only other place I can find a mounting kit is west coast fiero. I've heard tons of bad stories so worried about sending them a chunk of change...
Score: 633, Size: 43 bytes
|
4:
|
4.9 or 3800sc?
(by allansmithee, started: 04-14-2022, last post: 2022-04-17 15:04:48 CEST)
Hey everyone, I'm thinking of swapping my fiero with a 4.9 or 3800sc but Im not entirely sure whats involved in either swap. I've only done one engine swap before so I have limited experience with such affairs. I'd also like to keep it manual. I've looked around and the benefit I see from the 3800...
Score: 633, Size: 27 bytes
|
5:
|
4.9 6-speed swap progress...
(by lou_dias, started: 01-19-2022, last post: 2022-01-19 20:53:57 CET)
Had to make some new engine mounts for the 4.9 since one of them interfered with the middle drive shaft for the 6 speed. Also the original Cadillac mount on the firewall side was essentially destroyed.
Score: 633, Size: 37 bytes
|
6:
|
flywheel clutch bolt thread of 4.9 flywheel?
(by lou_dias, started: 01-11-2022, last post: 2022-01-12 19:26:38 CET)
Anyone know the thread on the clutch for the flywheels the Fiero Factory used in 4.9 conversions?I need to make longer versions of the bolts to mount the spacer on the flywheel for the 6-speed conversion.[This message has been edited by lou_dias (edited 01-11-2022).]
Score: 633, Size: 53 bytes
|
7:
|
Code 70 "Intermittent Throttle Position" on 4.9
(by Warlordsix, started: 10-31-2021, last post: 2021-10-31 22:19:41 CET)
Driving home today the car started bogging and wouldn't take throttle...especially under load. Kept pushing in the clutch and feathering the throttle, and she managed to get home. Seemed exactly like a fuel pump going out. In fact, something similar happened a year ago, and it was the fuel...
Score: 633, Size: 58 bytes
|
8:
|
4.9 converted to OBD2, Megasquirt...has anyone done this?
(by fierobear, started: 07-04-2021, last post: 2021-10-07 20:38:12 CEST)
Has anyone used an aftermarket ECM with a 4.9 swap?
Score: 633, Size: 67 bytes
|
9:
|
4.9 caddy engine distributor
(by Collector, started: 09-13-2021, last post: 2021-09-17 19:02:28 CEST)
when using a caddy 4.9, and using a CARB and a 1 wire Distributor with NO Computer Controls, what Distributor is needed ? was remembering maybe a OLDS ? Help. thanks
Score: 633, Size: 41 bytes
|
10:
|
4.9 + F40?
(by imacflier, started: 08-21-2021, last post: 2021-08-30 01:21:47 CEST)
Hi, Folks,This should be an easy one: Does the F-40 Six Speed bolt up to the Caddy 4.9?TIALarry
Score: 633, Size: 20 bytes
|
| |
|
Put a PFF Search Box on your Site!