|
141:
|
Rocker panel rust
(Archive: TD&Q - by boysatt, started: 04-05-2007, last post: 2009-02-19 10:45:53 CET)
I have been roding my 87 GT for a while, it was a rusty MN car that definatly seen lots of winters and salt. It wasn't bad enough to scrap the car and its a low mile blue 87 GT so I figured it was worth saving. My last rusty sections to fix are the rockers, I have had to cut then up pretty good to...
Score: 633, Size: 27 bytes
|
142:
|
Best way to stop frame rail rust?
(Archive: TD&Q - by labbe001, started: 05-24-2010, last post: 2012-01-11 09:59:13 CET)
so i removed the rear clip on my 87GT this weekend in an effort to repair the frame rails. once i got the clip off, i realized that the rust wasn't as bad as i initially thought and i don't feel it's bad enough to have to cut and weld in new. that was a huge relief to me since i don't know how to...
Score: 633, Size: 44 bytes
|
143:
|
Rust
(Archive: TD&Q - by ZiM_elite77, started: 09-09-2008, last post: 2010-04-21 09:20:53 CEST)
So i took another look at the Fiero i'm thinking about buying yesterday. there isn't any worrying rust damage that i can find, execpt for the bar that the trailer hitch is attached to (just beneath the rear bumper). The bolts are completely rusted on the head, and the bar itself is in pretty bad...
Score: 633, Size: 18 bytes
|
144:
|
Rust
(Archive: TD&Q - by SS_427, started: 01-17-2011, last post: 2013-03-14 10:12:48 CET)
Hi all! Well I'm new to the site and am hoping to be a Fiero owner very soon. Found an 88 GT near me which I will be looking at later this week. My only concern at this point is rust in the metal structure of the car. Car spent its whole life down south so I'm not overly concerned, but wanted...
Score: 633, Size: 13 bytes
|
145:
|
stripped rusted and ruined day of progress
(Archive: TD&Q - by Niterrorz, started: 12-06-2010, last post: 2012-01-11 09:57:29 CET)
the title says it all what makes it worse is its a cradle bolt..... *shakes fist* its halted my progress for the day and i need ideas on how to get it out. its on the drivers side and getting in there with vise grips has proved well unsuccessful to say the least. 15 mm stays on there but i go to...
Score: 633, Size: 54 bytes
|
146:
|
Pics of Rust and missing pieces.. need a little help identifying some
(Archive: TD&Q - by CheshireGrin, started: 10-19-2009, last post: 2011-05-02 10:43:41 CEST)
Ok so finally dug into my car and tryed to determine the rust situation as well as what it needs:So in this picture the air filter housing is missing along with some connectors and relaysRed Circle: Im pretty sure this is the fuel pump relay but as im very new i could be way offBlue Circle: Not...
Score: 633, Size: 84 bytes
|
147:
|
Rusted brake lines/fittings 86SE
(Archive: TD&Q - by Feydakin, started: 06-22-2003, last post: 2004-02-23 13:39:28 CET)
Ok, replaced the MAster Cyclinder and then blew the right rear brake line right at the T fitting.. The part that broke was the long line heading to the front of the car.. Of course, it's rusted pretty bad.. Any advice for breaking this thing loose?? I'd hate to have to replace the other two lines...
Score: 633, Size: 43 bytes
|
148:
|
bolt hole in head rusted right threw...replace or fix?
(Archive: TD&Q - by Elenor84, started: 02-01-2002, last post: 2002-05-11 09:55:10 CEST)
Hey guys...as most of u know I am rebuilding a v6 right now and the thing that worries me the most is that one of my heads is busted from the exhaust manifold bolt hole rusting threw...now can a machinest fix this or do I have to get a whole new head? Thx!
Score: 633, Size: 65 bytes
|
149:
|
Impressions on Rust Bullet?
(Archive: TD&Q - by smartaxel, started: 02-07-2005, last post: 2005-08-18 10:16:26 CEST)
Has anyone used Rust Bullet, and what were your impressions of it?I used it as a temporary "fix" this winter on 2 cars and wasn't overly happy with the result. It looked nice when applied, but it seems with Michigan weather, the rust is coming through it over a month's time. Wanted to see if...
Score: 633, Size: 39 bytes
|
150:
|
How to tighten the exhaust manifold with rusted bolts?
(Archive: TD&Q - by jwrape, started: 06-24-2011, last post: 2013-03-14 10:11:49 CET)
My 86 GT runs great......(92k mi.). I have a exhaust leak on rear manifold #5, i think, cylinder. I can actually see the space between the head and the manifold where the gasket has fell apart and left a couple little pieces. Enough to leave a crack to move exhaust through.Now I know the bolts...
Score: 633, Size: 63 bytes
|
| |
|