1631:
|
4.9 radiator
(Archive: TD&Q - by mrod, started: 05-19-2005, last post: 2005-08-18 10:13:12 CEST)
Are there any cooling issues with using a stock V6 radiatior to cool a 4.9 ?
Score: 499, Size: 19 bytes
|
1632:
|
4.9 hard time starting hot
(Archive: TD&Q - by Dizzixx, started: 01-28-2010, last post: 2011-05-02 10:43:09 CEST)
Anyone have any ideas as to what would cause my 4.9 to have a hard time starting hot?I am thinking its either wiring overheats and resistance increasing or starter overheating causing simillar problem or both. It has a hard time turning over when its up to temp after being turned off. It will not...
Score: 499, Size: 36 bytes
|
1633:
|
4.9 question
(Archive: TD&Q - by Don Vellenga, started: 12-04-2003, last post: 2004-07-10 10:38:57 CEST)
Hi All,This is for the Caddy experts on the list. In 1992, did the Seville have PFI or TBI or was there a choice ? Did Cadillac offer a 4.5 in 92 ? Is there a serial number that will indicate if it is a 92 and a 4.9 ?Thanks,Don
Score: 499, Size: 27 bytes
|
1634:
|
Got my 4.9 Caddy motor need to sell my 2.8
(Archive: TD&Q - by Bluemagic, started: 03-20-2001, last post: 2001-09-24 23:34:36 CEST)
I finally decided on the caddy 4.9 swap and got my engine today from a 93 caddy that was hit hard in the rear.Before I made my final choice I got hold of a Deville with the 4.9 and this car flew even with that big body the take off was awsome not to mention top end speed so I can imagine it in my...
Score: 499, Size: 54 bytes
|
1635:
|
4.9 Intake
(Archive: TD&Q - by tn88gt, started: 10-20-2004, last post: 2005-01-19 11:08:50 CET)
I know this question has been asked before, but I haven't found a definitive answer. Will the short ram/high flow intake system from a 94-01 Dodge Ram Truck work on our engines? What kind of modification is needed? Does anyone have any pics? I need to replace the current hose and wouldn't mind...
Score: 499, Size: 19 bytes
|
1636:
|
91 4.9 scan software with ALdl---USB cable
(Archive: TD&Q - by falcon_ca, started: 04-16-2012, last post: 2016-03-23 10:13:20 CET)
I have an ALDL---USB cable from http://www.aldlcable.com I used with the V6 and now I would like to use it with my 4.9 but I can not find any software for the 4.9.What are you using?
Score: 499, Size: 54 bytes
|
1637:
|
4.9 will not
(Archive: TD&Q - by F355spider, started: 03-17-2005, last post: 2005-08-18 10:15:20 CEST)
Start. I used the Fiero Factory harness it is basic plug and play. Before I start tracing wires I was wondering if anyone else had this happen? Everything powers up but when I hit the starter switch the starter does not engage.
Score: 499, Size: 26 bytes
|
1638:
|
4.9 ECM plug pins?
(Archive: TD&Q - by Mickey_Moose, started: 02-28-2004, last post: 2004-07-10 10:36:43 CEST)
Anyone have a part number or where to buy then from? I am looking for just the pins that are crimped onto the ends of the wires.thanks,Tim
Score: 499, Size: 33 bytes
|
1639:
|
4.9 swap question
(Archive: TD&Q - by Dragon1, started: 06-26-2003, last post: 2003-11-10 11:09:46 CET)
Do I need to trim the battery tray for clearance, and/or do I need to move the battery or can I mount it in the same place and not trim the tray??I am using the stock caddy alternator with an idler pully about where the smog pump used to bolt and then an empty air conditioning compressor for belt...
Score: 499, Size: 28 bytes
|
1640:
|
need help with my 4.9
(Archive: TD&Q - by wiccantoy, started: 02-17-2007, last post: 2009-02-19 10:46:08 CET)
O.K. here is where i am having problems. Hopefully someone on here can lend a hand. I have everything in my sig done to my 4.9. Now here is the problem. I have everything set to where it is supposed to be set at and when cold and under a load (driving down the road) it dogs down like there is a...
Score: 499, Size: 33 bytes
|
|