|
1651:
|
4.9 swap info manual.....Rockcrawl,others??
(Archive: TD&Q - by Dragon1, started: 10-11-2002, last post: 2003-02-04 11:37:26 CET)
Rockcrawl,You have succesfully done the 4.9 swap and seem to be very happy with it.Also you seem to be very knowledgable technically and electrically.I will be accumulating parts this winter to do a 4.9 swap next spring.I know that I will have a million questions to ask as do a bunch of other...
Score: 499, Size: 54 bytes
|
1652:
|
4.9 Is it better to ground ??
(Archive: TD&Q - by bristowb, started: 06-18-2011, last post: 2013-03-14 10:11:50 CET)
With a 4.9 is it better to ground on the alunimun block or the cast iron heads? I have a front mount battery just running the negative cable.
Score: 499, Size: 40 bytes
|
1653:
|
4.9 Waterpump
(Archive: TD&Q - by olejoedad, started: 04-29-2009, last post: 2011-05-02 10:44:39 CEST)
Could someone post a close up picture of the 4.9 water pump showing the timing marks?
Score: 499, Size: 25 bytes
|
1654:
|
4.9 combustion chamber volume and port flow
(Archive: TD&Q - by Will, started: 08-22-2009, last post: 2011-05-02 10:43:59 CEST)
I've searched briefly for these data points, but haven't come across them.Obviously this thread has a good bit of build info: http://www.fiero.nl/forum/Forum2/HTML/061613.htmlBut I'm interested in getting down to brass tacks... The difference in compression between using MY99 Northstar pistons with...
Score: 499, Size: 50 bytes
|
1655:
|
temp gauge not working 4.9 in an 84
(Archive: TD&Q - by Niterrorz, started: 01-06-2012, last post: 2013-03-14 10:10:14 CET)
so I was rounding off the little wiring bugs I have and found my temp gauge doesn't work in my 4.9. I've looked at mickeys wiring thread but my tps plug doesn't have the same colored wires. Mine are black, blue and grey and it seems my temp sender grounds thru the unit.when my sender isn't grounded...
Score: 499, Size: 47 bytes
|
1656:
|
4.9 AC wiring in cadero
(Archive: TD&Q - by twodogjohnny, started: 05-08-2005, last post: 2005-08-18 10:13:32 CEST)
87 SE auto v693 deville (2240 ecm)Using the caddy compressorfrom the caddy compressor, I have:wire that goes to ground, and a dark green that is loose.On the fiero AC relay I have:dark green and light green looseblack/white is gound (i think)dark blue goes to F4 on the caddy ECM. so the 3 wires...
Score: 499, Size: 38 bytes
|
1657:
|
4.9 flywheel questions
(Archive: TD&Q - by Psychosis39, started: 06-12-2003, last post: 2003-11-10 11:10:58 CET)
Well I read somewhere that the Z24 flywheel is basically the 88 flywheel. Is this true??Also I remember someone using a flywheel from a 3.1 corsica, is this the same flywheel as the z24?Because, a local yard has a million of these things and I can get it for 25 dollars plus them pulling it from the...
Score: 499, Size: 36 bytes
|
1658:
|
anyone ever relocate the solenoid on a 4.9 starter?
(Archive: TD&Q - by wiccantoy, started: 04-09-2008, last post: 2009-09-07 11:04:29 CEST)
ok the starter is still getting heat soaked on my 4.9l starter. anyone ever relocate the solenoid connected to the starter? anyone have pics on how they did it? etc....
Score: 499, Size: 63 bytes
|
1659:
|
Rebuilding Supplies for caddy 4.9
(Archive: TD&Q - by RobKnecht, started: 05-07-2003, last post: 2003-11-10 11:09:26 CET)
Does anyone know of some good sources for supplies to rebuild a caddy 4.9 thathas reasonable prices?? (cam bearings, main and rod bearings, gasket sets).thanks in advancerob knecht
Score: 499, Size: 45 bytes
|
1660:
|
Rough Idle with cold start of 4.9
(Archive: TD&Q - by Saber49, started: 06-19-2004, last post: 2004-10-15 10:17:21 CEST)
Ok heres the problem... my 4.9 starts ok but idles at about 500-600 rpms when it first starts up. sometimes it may even stall out. however once i rev it up a few times the idle starts to grow closer to 800 then about after 15-20 min of driving all is well. any ideas on what may be causeing the...
Score: 499, Size: 43 bytes
|
| |
|