|
|
23031:
|
Will a 88 computer and chip work in an 85 SE V6 with no wiring mods?
(Technical Discussion & Questions - by cvxjet, started: 03-26-2019, last post: 2019-03-27 14:18:32 CET)
I have an 85 SE V6 that I have converted to a 3.4 F-body and Getrag 5 spd.......It does not run completely happy.....full out it goes great, but in slow to stop-n-go traffic it has jerky throttle response...I have switched out every sensor and also swapped in a new/rebuilt 1985 computer which had...
Score: 236, Size: 5535 bytes
|
23032:
|
EGR solenoid and IAC valve 1988 3.4 swap
(Technical Discussion & Questions - by OriginalDoug, started: 07-30-2017, last post: 2017-08-01 23:29:53 CEST)
I have two questions, first I'll start with the IAC valve.I'm getting the infamous idle surging that many of us seem to have. plus the car seems to bog around 3000 rpms when under load. I took out the IAC and cleaned it hoping to resolve some of this. While out I also did this test that phonedawgz...
Score: 236, Size: 7886 bytes
|
23033:
|
87 brake upgrade
(Technical Discussion & Questions - by spcearle, started: 09-15-2017, last post: 2017-10-06 15:22:32 CEST)
ok im in the process of getting everything put together for a brake upgrade on my 87 mainly because of an inspection issue but also because of the fact that now i am away from nyc and back into an area where i can actually get the car upto any speed ive realized on a few sketchy situations just how...
Score: 236, Size: 5656 bytes
|
23034:
|
DIY solid cradle bushings
(Technical Discussion & Questions - by Boot, started: 11-03-2016, last post: 2016-11-16 17:08:56 CET)
Does anyone have the dimensions for the Rodney Dickman aluminum cradle bushings? I figure, why would I spend $100 when I have a lathe at my disposal?? (And im broke!) Im dropping my engine this weekend so I can do the water pump, ac compressor, and install a belt tensioner, so I figure I may as...
Score: 236, Size: 11604 bytes
|
23035:
|
3800 AC Swap Questions
(Technical Discussion & Questions - by AndrewTHG, started: 10-08-2019, last post: 2019-10-09 15:37:17 CEST)
I know this has been covered in quite a few threads, and trust me, I have been through the majority of them. But there are a couple bits of information I am still unsure about that I was hoping some AC gurus could answer. I am not versed in AC very much at all, but want to try my hand at maybe...
Score: 236, Size: 3748 bytes
|
23036:
|
Am I missing some connections at the Junction Block?
(Technical Discussion & Questions - by Jasperr, started: 05-16-2021, last post: 2021-05-20 17:11:21 CEST)
I'm moving across the country in a week and half! The car is coming in tow finished or not but I really want it running before I take off. Have a 3800 NA swap into an 85 and I'm not getting any power from it. I'm using Dan's harness. Comparing my junction block vs other's I'm wondering if I'm...
Score: 236, Size: 4562 bytes
|
23037:
|
Has it "Been Done" ? swap
(Technical Discussion & Questions - by Lou6t4gto, started: 04-09-2018, last post: 2018-04-11 17:42:01 CEST)
Has anyone ever hooked a PONTIAC V8 to a 4t65e-HD and installed it in a Fiero ? I've got a 455 that is looking for a home. Can Room be made ?
Score: 236, Size: 8566 bytes
|
23038:
|
Question,3800 Fuel Line attachment?
(Technical Discussion & Questions - by James Bond 007, started: 05-03-2014, last post: 2014-05-05 18:57:09 CEST)
How did you attach your fuel lines at the engine, for your engine swap? I used mini hose clamps, but Im worried because there was only about 3/4 of an inch of metal tubeing to slide the ruber fuel line on. Is this going to pop off? No, I cant slide the hose on further,it hits a flange or what ever...
Score: 236, Size: 1995 bytes
|
23039:
|
Check Engine Codes P0140, P0481 on 3800 Swap
(Technical Discussion & Questions - by hinesb1890, started: 09-28-2015, last post: 2015-09-29 03:12:00 CEST)
Hi all,Im getting two codes on my 3800 series II swap:P0140: 02 sensor circuit no activity, detected bank 1 sensor 2P0481: fan 2 control circuitAre these referring to sensors that exist in the original car but are not needed for the fiero? The wording makes is sound like there might be two 02...
Score: 236, Size: 3387 bytes
|
23040:
|
oil sender electrical issue
(Technical Discussion & Questions - by maybenot, started: 11-13-2013, last post: 2013-11-16 13:41:02 CET)
hi guys,so a little while ago i replaced my oil sender,actually i upgraded to 87/88 style and re-wired the new plug for it.(thank you ogre's cave for the how-to).for about a week now intermittently, the fuel pump stays running when i turn car off. i found by wiggling the new sender's plug it would...
Score: 236, Size: 3091 bytes
|
| |
|
Put a PFF Search Box on your Site!