|
|
21:
|
POWER STEERING - Possible New Rack Donor
(Archive: TD&Q - by mrfixit58, started: 04-17-2003, last post: 2003-08-19 11:58:27 CEST)
First, for those who don't want, care or think that power steering is needed for a Fiero... please move onto the next thread.For those who are interested, I may have made a discovery today. I noticed that the 4th generation F-body is a front steer car like the Fiero so I measured a power steering...
Score: 1000, Size: 53 bytes
|
22:
|
Ladies and Gentlemen, 4th Generation Camaro/Firebird power steering racks may work!!!
(Archive: TD&Q - by 1985FieroGT, started: 11-04-2003, last post: 2004-07-10 10:37:15 CEST)
Just remember, if this works, I get the credit, for making the idea, and possibly doing it myself for the first one, and jlhuber gets some credit for helping me. The fiero's steering rack is a total length of 52" give or take how it's adjusted with the end links. A 4th Generation steering rack is...
Score: 1000, Size: 99 bytes
|
23:
|
Power steering racks for the 84-87 Fiero
(Archive: TD&Q - by Rodney, started: 07-21-2004, last post: 2005-01-19 11:12:35 CET)
I have looked into this:http://www.fiero.nl/forum/Forum1/HTML/040892.htmlThe only rack that was even close was the 2002 Liberty. There is probably a range of years where they are all the same rack in the Liberty. My notes just say 2002. The rack end has a female thread on the ends but you can use a...
Score: 1000, Size: 49 bytes
|
24:
|
Power Steering Rack Options??
(Archive: TD&Q - by mram10, started: 01-15-2012, last post: 2013-03-14 10:10:18 CET)
I tore apart an 02 gtp for the eng/trans and took out the power steering rack and asked myself "I wonder if I could mod this and add it to my fiero kit car?" Of course I have no idea, so please give me your ideas. Thanks as usual guys.Note : This is going in a kit car with a 3800sc from the same...
Score: 1000, Size: 38 bytes
|
25:
|
If you have installed a Corvette power steering rack, I have a question.
(Archive: TD&Q - by sspeedstreet, started: 09-19-2011, last post: 2013-03-14 10:10:15 CET)
Did you have any clearance issues with the intermediate shaft passing through the firewall?Thanks,~Neil
Score: 1000, Size: 87 bytes
|
26:
|
What rack+pinion will fit in a Fiero (power steering)
(Archive: TD&Q - by v8fiero400, started: 12-05-2005, last post: 2006-08-11 13:06:28 CEST)
Just did a 3.1 4t60e swap for a friend. The engine still has the power streeing pump on it....... so I figure why not just run some steel lines to the front and have power steering.The only problem is that I have to find a suitable power steering rack + pinion that can fit on the fiero.Anyone know...
Score: 1000, Size: 66 bytes
|
27:
|
power steering rack
(Archive: TD&Q - by Msaby, started: 01-21-2002, last post: 2002-05-11 09:54:41 CEST)
I am planning on installing power steering in my replica. Has anyone considered using a power rack from a 84 corvette? The specs look very similar. What pumps can be used with a power rack? Any advice would be appreciated.ThanksMike
Score: 1000, Size: 27 bytes
|
28:
|
'88 Power steering rack questions
(Archive: TD&Q - by SD455, started: 09-24-2004, last post: 2005-01-19 11:09:49 CET)
HiI went to replace my inner tie rod ends today to fix a loose rattle from both front wheels and found that there is alot of up and down movement on the shaft that the tie rods connect to. My question is, has anyone anyone had this problem and if so, short of buying a rebuilt rack, what did you do...
Score: 1000, Size: 41 bytes
|
29:
|
"F" body power steering rack. Has anyone done it yet?
(Archive: GFC - by Rickady88GT, started: 08-09-2004, last post: 2005-01-19 11:47:39 CET)
I got an "F" body power steering rack a wile back and just started putting it on my 88GT. I want to know if anyone has finnished this swap yet. I know of one other that has started it but has not posted the finnished swap?
Score: 1000, Size: 67 bytes
|
30:
|
1988 power steering rack maybe for sale. The real McCoy.
(Archive: GFC - by Rodney, started: 01-11-2003, last post: 2003-05-31 10:16:55 CEST)
I have been working on getting an original GM made 1988 Fiero power steering rack. It is a rack that was most likely taken off an executive driven 1988 Fiero. All the power steering systems on the 88 executive driven Fieros were removed and manual racks installed before these cars were sold to the...
Score: 1000, Size: 66 bytes
|
| |
|
Put a PFF Search Box on your Site!