21:
|
3800 - lower manifold coolant plugs? or throttle body spacer with coolant blockoff?
(Technical Discussion & Questions - by DimeMachine, started: 06-10-2019, last post: 2019-06-23 20:47:40 CEST)
Question for the 3800 crowd and first hand knowledge.My air inlet pipe and rubber coupler is getting more heatsoaked than I would like. I see a lot of the GTP crowd plugs the two holes in the lower intake manifold thus blocking coolant flow to the M90 supercharger and throttle body. I am not...
Score: 1000, Size: 96 bytes
|
22:
|
Fuel pump and throttle body problems
(Technical Discussion & Questions - by jaredaltizer, started: 06-08-2019, last post: 2019-06-12 19:17:59 CEST)
Hello PFFers.Recently, I have taken on the task of swapping my stock 2.8 V6 out for a lower-mileage one, because I threw a rod in my original motor. This has been my first and (hopefully) only engine swap. After finally getting the engine and cradle back into the car with most of the vacuum lines...
Score: 1000, Size: 49 bytes
|
23:
|
Throttle body leaking ?? Leaking what?
(Technical Discussion & Questions - by Frank-ero, started: 04-29-2019, last post: 2019-05-13 20:00:17 CEST)
I installed a new TPS and CPV. Took the Fiero down the road and some acceleration problems I was having had stopped. Next time it has code 21 and 22 (high voltage tps and low voltage tps...) But I took the hose from the throttle body off to spray some starter in and liquid comes pouring out! AH...
Score: 1000, Size: 48 bytes
|
24:
|
2.8 Dual throttle body intake manifold question
(Technical Discussion & Questions - by Boot, started: 05-30-2017, last post: 2019-03-16 01:14:06 CET)
Ive been thinking about making something similar to this. But theres one thing about this one in particular that confuses me a little. Arent both of those throttle bodies stock fiero ones? Because everything ive ever heard says that two 52mm's would be way too much throttle body for the engine and...
Score: 1000, Size: 52 bytes
|
25:
|
Big bore throttle body
(The Mall - by jjd2296, started: 02-02-2019, last post: 2019-02-06 01:36:24 CET)
Anyone have one of the fiero Holley throttle bodies that have been bored out for sale?
Score: 1000, Size: 30 bytes
|
26:
|
My Homemade 2.8 Dual Throttle Body Intake Manifold
(Technical Discussion & Questions - by Boot, started: 06-28-2017, last post: 2019-02-05 22:53:27 CET)
So the other day at work, I decided on my lunch break that I was going to make myself a dual throttle body intake manifold for my 2.8.Got home and pulled the car apart to get at the middle intake, brought it to work with me the next day and stayed late building this:The TB's are Holley units off of...
Score: 1000, Size: 55 bytes
|
27:
|
88 V6 Throttle Body Idle Screw
(Technical Discussion & Questions - by fgt1988, started: 10-20-2018, last post: 2018-10-24 02:59:54 CEST)
Does anyone know if all of the V6 Throttle Bodies Idle screws were all same design STAR key ? I had mine bored many years ago and never thought of looking at it until recently when I went to adjust and realized it is a FLAT screwdriver type - Wasn't sure if it was ...
Score: 1000, Size: 39 bytes
|
28:
|
WTB fuel lines that connect to 2.8 throttle body.
(The Mall - by 2fast288fierogt, started: 10-09-2018, last post: 2018-10-11 02:16:26 CEST)
I was trying to twist out the one closer to the firewall and it twisted the line so now it looks more like a DNA strand than it does a fuel line. I guess I just need that one. I'm not sure why it did that, I was turning it lefty loosey. Idk how I'm going to get it off without the fuel line just...
Score: 1000, Size: 65 bytes
|
29:
|
Can I bypass the throttle body return line?
(Technical Discussion & Questions - by djcottrell, started: 09-20-2018, last post: 2018-09-20 21:01:59 CEST)
I am putting in a racing fuel cell in my 84 with the 2.5 TBI. It will be using a holly fuel pump and regulator. It is my understanding that if I am using the holly regulator that I can terminate the return fuel line as I will not be using the factory regulator. I am putting in a 350 in a year or...
Score: 1000, Size: 54 bytes
|
30:
|
2.8 Air cleaner to throttle body ductwork/hose cleaning
(Technical Discussion & Questions - by viperine, started: 07-24-2018, last post: 2018-07-25 04:04:22 CEST)
The intake tube that connects the air cleaner to the throttle body on a 2.8. Has anyone successfully cleaned it? Any time I work on any of my cars (even the 66k mile formula), if I have to touch/remove this duct, my hands are pitch black afterwards. Is there a trick to cleaning this? It's the worst...
Score: 1000, Size: 64 bytes
|
|
Put a PFF Search Box on your Site!