|
11:
|
no more temp gauge pegging
(Technical Discussion & Questions - by wayneman, started: 07-04-2014, last post: 2014-07-05 03:29:11 CEST)
http://www.fierosails.com/tempgage.htmlthe link in the archives was a great fix for a pegging temp gauge. No more tapping the top of the dash!
Score: 841, Size: 35 bytes
|
12:
|
Temp gauge pegging out in the cold direction
(Technical Discussion & Questions - by henryj53, started: 04-21-2016, last post: 2016-04-24 03:36:39 CEST)
Hey all,has anyone ever had this issue before, instead of pegging out in the hot direction my temp gauge pegs and gets stuck in the cold direction, tap the dash and it comes down and then registers fine for the time you are running and driving that day then let it sit overnight and does it again.
Score: 841, Size: 53 bytes
|
13:
|
Pegging temp gauge question (DOHC swap related)
(Technical Discussion & Questions - by tesmith66, started: 10-07-2015, last post: 2015-10-07 19:00:43 CEST)
I have a 3.4 DOHC in my 86 and am using the single wire (temperature only) sending unit that came with the engine. Since I do not need the temperature warning light bulb test feature on startup, can I just snip the wire that erroneously feeds 12V to the gauge on startup? I see no need to swap wires...
Score: 841, Size: 57 bytes
|
14:
|
Pegged Temp. Gauge, 1988 GT 5-Speed
(Technical Discussion & Questions - by hdryder, started: 10-08-2021, last post: 2021-10-10 22:07:13 CEST)
I know this is a common problem, and there used to be some posts available for troubleshooting, but the ones I found in a search are no longer available.Does anyone have information regarding troubleshooting and fixing a pegged Temp. Gauge?Thank you for any and all help on this one.
Score: 841, Size: 43 bytes
|
15:
|
Temp Gauge pegs to extreme vertical position
(Archive: TD&Q - by hdryder, started: 01-14-2013, last post: 2016-03-23 10:11:02 CET)
The Temp Gauge, on my '88 Formula, pegs to the extreme vertical position.Any ideas what to look for?Thanks for the help.
Score: 841, Size: 54 bytes
|
16:
|
Temp gauge needle pegging...
(Archive: TD&Q - by perry rhodan, started: 06-03-2006, last post: 2007-03-15 11:33:07 CET)
I've saw on some site , that we can make a mod to avoid the temp gauge pegging. I dont know to what this term refer...can you explain me what this mean?Thanks
Score: 841, Size: 43 bytes
|
17:
|
Temp gauge pegged at 0 degrees
(Archive: TD&Q - by mrtgman, started: 10-10-2001, last post: 2002-02-08 14:48:08 CET)
Well you know what I mean. Pegged all the way to the left. Do I need to replace the gauge or is there an electrical fix? It's an 86 gt if it matters.Thanks
Score: 841, Size: 40 bytes
|
18:
|
Fixed pegging temp. gauge but still have problems!
(Archive: TD&Q - by FIER086, started: 06-24-2008, last post: 2009-09-07 11:04:20 CEST)
Did the temp. gauge fix and I zeroed the gauge by unplugging the sender and turning the key to on. The gauge does not peg anymore but it still moves a bit. So now when the car is off the needle is to the left of the 100* but once I turn it to on the needle goes to 100*. Is this right?? Another...
Score: 841, Size: 60 bytes
|
19:
|
Other GM cars peg temp gauge too...
(Archive: TD&Q - by deceler8, started: 10-19-1999, last post: 1910-01-20 08:12:06 AMT)
Had to drive Dad's '94 Astro van the other day and his temp gauge pegs on startup...I thought we were the only ones ?At least GM is consistent.
Score: 841, Size: 46 bytes
|
20:
|
Pegging Temp Gauge fix
(Archive: TD&Q - by Bob Englert, started: 03-30-2001, last post: 2001-09-24 23:34:51 CEST)
I recently did this fix to both of my GT's and have had great luck with them both. I have read that several users have had problems (not working) and I wanted to share my observations.The instructions are available on the Michigan Fiero Club website. There is a WEB version and an Adobe Acrobat...
Score: 841, Size: 36 bytes
|
| |
|