|
21:
|
carbd 4.9 intake
(Archive: TD&Q - by laurenskye, started: 01-10-2006, last post: 2006-08-11 13:10:41 CEST)
Where the carb sits on the intake, inside the intake bores are smaller tubes. Do these need to be bored out or removed some other way. They are supposed to be removed for running a carb right?
Score: 385, Size: 2544 bytes
|
22:
|
4.9 pulley question
(Archive: TD&Q - by GT, started: 12-11-2005, last post: 2006-08-11 13:09:02 CEST)
I have one more thing to mount to the front of my engine before I can try fitting belts and that is the pulley that goes to the right of the water pump and above the A/C compressor:So my question is, since the bolt that holds it on is smaller than the hole in the bearing, how do I attach the pulley...
Score: 770, Size: 10772 bytes
|
23:
|
Junkyard find for my 4.9 kinda neat.
(Archive: GFC - by Capt Fiero, started: 11-21-2005, last post: 2006-08-11 11:52:17 CEST)
Fiero Chick and I were checking out the local Junk-Yard for some great deals. I am still trying to find things to make my 4.9 cleaner. But I have not had any time to spend getting it dressed up. I found a little thing that I think is kinda unique.http://www.pickapart.ca <<< home...
Score: 608, Size: 4136 bytes
|
24:
|
Were you at Carlisle 2005??!? If so.. you might be a movie star!
(Archive: GFC - by BobadooFunk, started: 11-28-2005, last post: 2006-08-11 11:52:04 CEST)
ok ok.... maybe not a star..... but your car is most likely in here!!!:new link added:the quality is SO SO.... i have a much better one on my comp, but the only good way to send it is AIM.best i could do with 25mb limit.if you do not like music, or something of somesorts.... too bad No...
Score: 770, Size: 9492 bytes
|
25:
|
Anyone seen Rockcrawl??
(Archive: GFC - by Jesse_James, started: 02-10-2006, last post: 2006-08-11 11:48:55 CEST)
Hey everyone, just curious if Rockcrawl is still in the scene. I am almost done with my 4.9 swap and I still need my chip re-programed. Is there anyone else out there that can do the job for the same price? Any help would be greatly appreciated. Rockcrawl, if you see this can you please pm me with...
Score: 608, Size: 14826 bytes
|
26:
|
any one reprogram 4.9 chips
(Archive: GFC - by crazyfieromike, started: 10-03-2005, last post: 2006-02-06 12:24:56 CET)
i am need of some one to program my 4.9 computer for my swap and possibly make me a front motor mount due to i ma not going to have a lot of time to do my swap once i start the tear down i ve beentrying to get a hold of rock craw for almost a month now so if any one eles does it or could get...
Score: 770, Size: 6154 bytes
|
27:
|
end links on lowered suspension
(Archive: TD&Q - by hellbentkrusty, started: 08-08-2004, last post: 2005-01-19 11:11:42 CET)
chopped my springs a while back and just love the way it sits but don't like the look of the end links.question ...how do you determine the length /angle that they should be at after?and does anyone have shock problems after lowering?newbee in van bcthanx clynt
Score: 1000, Size: 1055 bytes
|
28:
|
Wheel widening?
(Archive: TD&Q - by vinny, started: 10-17-2004, last post: 2005-01-19 11:08:52 CET)
Who widens wheels? Any websites? If not, where can you buy sets with wider rear wheels? Something like 17x7s front with 17 or 18x10s or so in the back.
Score: 770, Size: 5709 bytes
|
29:
|
v6 cooling fan
(Archive: TD&Q - by oneblack85gt, started: 06-16-2004, last post: 2004-10-15 10:17:24 CEST)
i think all of you who have a fiero that came with a v6 should have this. it is located in the storage compartment right behind the engine bay. on the right side, if you pull back the carpet, there is a small fan there. also, if you look in the engine bay, you will see a small aluminum pipe with...
Score: 385, Size: 3862 bytes
|
30:
|
3.1 Oil Pressure Woes
(Archive: TD&Q - by FieroPilot, started: 01-09-2004, last post: 2004-07-10 10:38:09 CEST)
I have had low oil pressure ever since I did the 3.1 swap and was scratching my head trying to figure out why when I realized that I had to use the oil pressure sending unit from the 3.1 cause the one from the 2.8 was to big and got in the way of the oil filter. Well the holes on the insides of the...
Score: 385, Size: 1194 bytes
|
| |
|