21:
|
thread size for shifter
(Archive: TD&Q - by 86GTBen, started: 07-28-2011, last post: 2013-03-14 10:11:35 CET)
anyone know where i can find the thread size for the shifter? i am makeing a shift knob for myslelf and need to put a nut on the inside. its 5/8 but i dont know the thread size
Score: 775, Size: 33 bytes
|
22:
|
Oil sending unit thread size??
(Archive: TD&Q - by Darkbullet, started: 08-07-2011, last post: 2013-03-14 10:11:32 CET)
What's the thread size on the sending unit pipe? I have an aftermarket sender that requires a 1/8 npt thread.
Score: 775, Size: 43 bytes
|
23:
|
Motor mount bolt size and thread
(Archive: TD&Q - by masospaghetti, started: 09-27-2011, last post: 2013-03-14 10:11:06 CET)
Went out and found one of the bolts missing in one of my mounts!I don't have a pic at the moment, but it's the L-shaped bracket on the passenger side just aft of the crank pulley...its the bolt right in the middle of this pic: http://gallery.fierodomain....sRemoved001.JPG.htmlWhat is the size and...
Score: 775, Size: 48 bytes
|
24:
|
Brake hard line thread size
(Archive: TD&Q - by sspeedstreet, started: 10-05-2011, last post: 2013-03-14 10:11:02 CET)
Where the brake hose attaches. 10mm x 1.0? 1.25? 1.5?Thanks
Score: 775, Size: 42 bytes
|
25:
|
Decklid spring security Torx screw thread size?
(Archive: TD&Q - by Riceburner98, started: 10-17-2011, last post: 2013-03-14 10:10:57 CET)
Anyone know the thread size of the security Torx screws that the decklid springs pivot on? I removed them the other day and forgot to measure.. Car is 90 miles away now, won't see it 'till next weekend..Thanks!!
Score: 775, Size: 62 bytes
|
26:
|
I need a bolt thread size and length.
(Archive: TD&Q - by AL87, started: 02-09-2012, last post: 2013-03-14 10:10:12 CET)
I need to know what the thread size and length is for a bolt that couples the exhaust manifolds to the y-pipe.I had to cut the originals up as they were rusted in place during tear down. and they have been long thrown away.nothing in my stock fits, so I have to go buy new ones.help, please?
Score: 775, Size: 44 bytes
|
27:
|
Front Spindle Nut Thread Size
(Archive: GFC - by 86blackgt, started: 09-15-2010, last post: 2012-01-11 10:05:04 CET)
I was wondering if any one knows the thread size on the front spindle nut on an 86? Can't seem to find it anywhere.Thanks Ryan[This message has been edited by 86blackgt (edited 09-15-2010).]
Score: 775, Size: 41 bytes
|
28:
|
What is the size of the threads on the Fiero Rack Ends ?????
(Archive: TD&Q - by Boogaloo, started: 05-26-2010, last post: 2012-01-11 09:59:10 CET)
I am working on adapting a new rack but would like to extend the threads where the tie rods screws on ,what is the size of the threads and pitch so I can buy a die to fit it..............thanks
Score: 775, Size: 72 bytes
|
29:
|
Starter Bolts.....What Is The Thread Size??
(Archive: TD&Q - by BAM-BAM, started: 09-29-2010, last post: 2012-01-11 09:58:06 CET)
Ok, Relocating my starter on the 3.4 and I am using the jig kit that I barrowed from Misery. Please pardon my Paranoia, but I really, really do not want to mess this up. The kit didn't have the tap and I am stranded right now with no vehicle to get to the auto parts store. TIA
Score: 775, Size: 53 bytes
|
30:
|
thread pitch and bolt size
(Archive: TD&Q - by cyphersync, started: 11-04-2010, last post: 2012-01-11 09:57:46 CET)
Anyone know the thread pitch and bolt size of the slave cylendier hardware for a 86 gt 4speed? "someone" lost mine id guess 10x1.25 but im not sure.
Score: 775, Size: 39 bytes
|
|