|
|
31:
|
88 2.5 ecm pin out
(Technical Discussion & Questions - by jdv, started: 03-16-2023, last post: 2023-03-20 21:46:24 CET)
Can I get a copy of the 88 2.5 5 speed ecm pin out. Thought I had it saved but now I can not find it when I need it.[This message has been edited by jdv (edited 03-16-2023).]
Score: 149, Size: 678 bytes
|
32:
|
The Getrag F23 Tutorial - By Emc209i
(General Fiero Chat - by L67, started: 10-19-2011, last post: 2023-03-07 16:00:34 CET)
IntroductionThis article will familiarize you with the Getrag F23, its strengths and weaknesses, and supply detailed instruction for installing it and the necessary equipment. The F23Getrag’s newest iteration of their five speed transaxle is the F23, which has been built from 2000 - 2010. It is...
Score: 149, Size: 201797 bytes
|
33:
|
EVERYONE with a V6 please Read
(Technical Discussion & Questions - by $Rich$, started: 11-08-2003, last post: 2023-03-03 16:15:01 CET)
i added another Ground Strap about a 6inch pc. of 4Ga. Wire that goes from the 15mm bolt that holds the EGR Solinoid Bracket on, to the bolt by the battery tray where the small ground wire is that comes off of the negative Bat. terminal with the 10mm bolt, and my car runs ALOT smoother, it idles...
Score: 299, Size: 215803 bytes
|
34:
|
Completely new fuel injection system computer?
(Technical Discussion & Questions - by 82-T/A [At Work], started: 12-21-2013, last post: 2023-02-24 20:36:29 CET)
Hey guys, I know a lot of people are upgrading to the 7730 ECM (?)... but I was wondering if there isn't a better system, like maybe an aftermarket kit like a Holley ProJection oro something like that? I don't know what the newest one is... but I know there's a lot of kits out there that you can...
Score: 388, Size: 117600 bytes
|
35:
|
My 4.9 wiring thread
(Technical Discussion & Questions - by Mickey_Moose, started: 02-02-2009, last post: 2023-02-11 15:25:23 CET)
See Rockcrawls site for info on the engines mounts: http://www.fieroaddiction.com/caddy49c.html Note: please PM stickpony for ECM programming (VATS/etc) [/shameless plug]Lately I have been asked a lot of questions, so here is all the info that I use in 1 location:These notes apply to a 86 coupe...
Score: 600, Size: 166482 bytes
|
36:
|
Engine temps all over the place
(Technical Discussion & Questions - by Cliff Pennock, started: 06-14-2022, last post: 2023-01-23 20:13:32 CET)
Like the subject says, my engine temperatures are all over the place. "Normal" temperature seems to be between 175F and 195F but most of the time it shoots up to 230F in 20-30 seconds, stays there for a few minutes only to drop back to 175 within 10 seconds. Rinse. Repeat.There seems to be enough...
Score: 149, Size: 95515 bytes
|
37:
|
OBD 2 Scanner
(Technical Discussion & Questions - by jon m, started: 12-22-2022, last post: 2022-12-30 23:13:14 CET)
Hi - I picked up a OBD 2 scanner for cheap with 16 pins in the plug would I be able to use it on my 87 GT ?Many thanks for any help / OpinionsJon
Score: 236, Size: 5438 bytes
|
38:
|
C500 Connector Bodies
(General Fiero Chat - by Will, started: 12-10-2022, last post: 2022-12-11 16:12:00 CET)
From this thread:https://www.fiero.nl/forum/Forum2/HTML/128029.html quoteOriginally posted by phonedawgz:http://i386.photobucket.com.../fieroX/IMG_2009.jpg quoteOriginally posted by phonedawgz:Only this part of the connector was made. To purchase contact FieroX. I have some also but I...
Score: 388, Size: 4211 bytes
|
39:
|
ECM not sending fuel pump command
(Technical Discussion & Questions - by Dre0415, started: 11-30-2022, last post: 2022-12-04 21:16:57 CET)
Hello everyone, I recently purchased an 85 fiero gt that hadn't moved under its own power in over 12 years. The car is definitely a disaster. Recently I've been trying to undo all the Jerry rigging that was done by previous owners and putting the car back to factory condition. Anyways when I had...
Score: 236, Size: 13004 bytes
|
40:
|
Reving engine
(Technical Discussion & Questions - by Lombok, started: 09-26-2022, last post: 2022-10-01 04:33:31 CEST)
I have a 1987 v6 GT. Start up brings extreme surging from very low to 2500 rpm and cut out. Was running ok but a little fast. Had my auto tech look and he messed with the diagnostic plug on the ecm. Now if I start and keep the revs up till it warms up it runs smooth but won’t run under...
Score: 149, Size: 12071 bytes
|
| |
|
Put a PFF Search Box on your Site!