|
|
41:
|
4.9 connector....What is it?
(by Spadesluck, started: 04-01-2018, last post: 2018-04-02 04:20:54 CEST)
What was this connector to originally? This is my parts car that has a Fiero Factory 4.9 swap in it.
Score: 633, Size: 39 bytes
|
42:
|
4.9 alt Bracket on allante i take question
(by PAUL66, started: 06-19-2021, last post: 2021-06-22 05:28:39 CEST)
Finally getting around to working on my swap. I replaced the fuel pump and sending unit in the tank, demoted my battery up front and installed Rodney Dickman ultimate shift kit with his cables. I started tearing down my 4.9 to rebuild. I set my allante intake on it just for fun and I notice the...
Score: 633, Size: 49 bytes
|
43:
|
4.9 Pilot Bearing
(by P.O.L. Mafia, started: 08-21-2018, last post: 2018-08-22 00:51:19 CEST)
I am slowly collecting the parts to drop a 4.9 in my Fiero. 86 GT 2.8 4 speed. I've got just about everything but it hit me last night that I don't have a pilot bearing for the input shaft of the 4 speed. Is there a special one? do I have to fabricate this? any insight would be awesome.
Score: 633, Size: 30 bytes
|
44:
|
4.9 ALDL Wiring and Diagnostic
(by deanearl, started: 05-20-2014, last post: 2014-05-22 22:44:59 CEST)
I have my 4.9 in and wired up. I have wired the ALDL like below, question is how do I run the diagnostics...as the fiero or the Cadillac the engine and transmission came from? It is not wired like the original ALDL from the Cadi.http://members.shaw.ca/efog/Pen/4.9/4.9%20aldl.jpg
Score: 633, Size: 39 bytes
|
45:
|
4.9 Running Rich
(by pdemondo, started: 11-07-2015, last post: 2015-11-09 14:06:08 CET)
My 4.9 is running very rich. I can smell the fuel and the mileage is below 10.I read the engine data at idle after the car warmed up:BARO 27.74 "HG, 4.45VLT FUEL TR CL 25LT FUEL TR EN YESLT FUEL TR (L & R) 104COOLANT ...
Score: 633, Size: 25 bytes
|
46:
|
4.9 Valve cover question
(by TXGOOD, started: 04-16-2014, last post: 2014-04-18 15:40:17 CEST)
I thought I read where on the 4.9 you just reverse the valve covers and you are good to go, but I was just recently reading on Fiero Factory`s site about one won`t fit because of hitting the hinge bracket.Any thoughts?I`m picking up a 92 Deville engine this weekend and I will be picking people`s...
Score: 633, Size: 31 bytes
|
47:
|
Idle Learn Procedure On 4.9 L Caddy Engine
(by struck88, started: 03-20-2010, last post: 2015-01-08 02:43:11 CET)
I've read a lot of threads on this forum and wonder what is the correct idle learn procedure on a Caddy 4.9 L engine. I've adjusted the TPS and the IAC's values to curb my sail on or engine push ,which was quite bothersome, but I'm not quite sure how to relearn my ECM to the new values. Does...
Score: 633, Size: 51 bytes
|
48:
|
Fiero Factory 4.9 harness engine code ... any fix?
(by lou_dias, started: 05-03-2019, last post: 2019-05-06 04:10:41 CEST)
So I recently added back the bulb to my SES light on my Fiero Factory 4.9 conversion and it's on all the time.Has anyone over the course of time ever figured out what is the cause of this?Yes, I know they left the bulb out for this reason... A dozen years later I assume someone must have figured...
Score: 633, Size: 59 bytes
|
49:
|
Carb'd 4.9 dyno figures for easy reference
(by Arns85GT, started: 10-22-2014, last post: 2014-10-23 22:08:42 CEST)
Here is the build thread
Score: 633, Size: 51 bytes
|
50:
|
4.9 build question
(by P.O.L. Mafia, started: 01-15-2019, last post: 2019-04-18 21:24:06 CEST)
So, I have an 86 GT with a V-6 and four speed. I’m pulling the turd V-6 and putting in the 4.9, and I know before you say it, I’m starting off carbed and later I am going fuel injected. Im waiting because I intend to end up with coil on plug fly by wire but its going to take some time to get...
Score: 633, Size: 31 bytes
|
| |
|
Put a PFF Search Box on your Site!