|
|
71:
|
Ed Parks 4.9 wiring harness mystery
(by paulcal, started: 09-01-2014, last post: 2014-09-02 02:48:40 CEST)
While under the car today I noticed a loose red wire with a large round terminal connector on it. Upon further inspection I also found a smaller purple wire coming out of the same bundle that was not connected to anything either. These are run along the front injector rail. They look like they...
Score: 633, Size: 43 bytes
|
72:
|
Need info for 1984 4.9 swap trany wiring.
(by Dave_m, started: 06-08-2014, last post: 2014-06-15 19:19:10 CEST)
I am putting a 1994 4.9 with auto trany in my 1984 fiero. I need to know where to put the trany gear selector switch wires to. Its a 7 wire plug and i am just pulling my hair out trying to get this together.
Score: 633, Size: 49 bytes
|
73:
|
4.9 idle air control motor
(by jeffndebrus, started: 03-18-2009, last post: 2013-08-30 22:42:39 CEST)
4.9 idle air control motorI am having an idle problem. The car idles very high when first started- 1700rpms for a minute then it suddenly drops to 1000rpms and then it surges back and forth several times before settling in at around 1100rpms. I can take my foot off the gas pedal and the car is...
Score: 633, Size: 38 bytes
|
74:
|
Is there a thread detailing a 4.9 swap using the getrag?
(by imacflier, started: 05-09-2016, last post: 2016-05-10 01:54:52 CEST)
There MUST be one....but I will be darned if I can find it. Can someone help me with a link to the thread?TIA,Larry
Score: 633, Size: 66 bytes
|
75:
|
4.9 swap - need help Thanks!
(by 87GT2M6, started: 01-27-2015, last post: 2015-01-31 00:20:28 CET)
First thanks for any help on this matter anyone can give me. A Plus will be coming your way if I have not already done so.Here's whats going on. I did a 4.9 swap on my Fiero GT (87) a little over a year ago, and today the service engine light turned on. My question is what could be causing this?...
Score: 633, Size: 36 bytes
|
76:
|
TunerPro RT vs 5.0 not able to connect to 4.9 ECM
(by falcon_ca, started: 05-19-2016, last post: 2016-05-22 15:02:21 CEST)
I had to completely reinstall my good old ASUS EEE with XP.So, I reinstalled TunerPro and the ALDL cable driver.Using a known good adx fileTunerPro dont see my cable.I tryed configuration on Com3 and Com4What is the magic trick I m missing .....
Score: 633, Size: 59 bytes
|
77:
|
4.9 Cad exhaust manifolds
(by tcincpOR, started: 03-17-2018, last post: 2018-04-02 00:22:57 CEST)
I'm doing a 4.9 Cad swap and I have a question about the R side exhaust. Just so that I can confuse everyone, this is the side that would be Front on the Cad but now is Rear on Fiero. My engine is out of a 1995 Deville. Some exhausts in pictures on this site I have noticed have 2 outlets...
Score: 633, Size: 34 bytes
|
78:
|
4.9 overheats with AC on
(by rickburns, started: 03-27-2013, last post: 2014-04-26 18:36:59 CEST)
My 4.9 engine overheats on hot days in city traffic with the AC on. It's converted to R134, has the stock Caddy compressor, stock condensor, four core radiator, extra push fans to augment the stock pull fan on the radiator/condensor pack, as well as an oil cooler. Without AC, I can run hard and no...
Score: 633, Size: 34 bytes
|
79:
|
93 4.9 Seville wiring
(by phonedawgz, started: 01-12-2014, last post: 2014-01-13 13:28:21 CET)
Does anyone have wiring diagrams for the 93 4.9 Seville with dual O2 sensors that they are willing to share?Thanksphonedawgz
Score: 633, Size: 32 bytes
|
80:
|
4.9 swapped and cant keep running
(by Cavvy09, started: 06-11-2015, last post: 2015-06-19 21:49:38 CEST)
Hi everyone. New to the forum and my first time posting. I have owned a few fieros over the years, but this is my first swapped. The engine is from a 92 deville. It ran fine for awhile, and then just wouldn't start one day few months ago. It would start but shut down after just one second. I have...
Score: 633, Size: 41 bytes
|
| |
|
Put a PFF Search Box on your Site!