|
|
91:
|
2.8 cam in a 3.4
(Archive: TD&Q - by Wicked86, started: 02-21-2010, archived: 2011-05-02 10:43:00 CEST)
Still putting together my 3.4 pushrod, and I wsa wondering if anyone had used this cam in one of them. I have read that the 3.4's have some breathing problems at high rpm, and so I am really trying to choose my upgrades carefully so as to not compound this...
Score: 378, Size: 8306 bytes
|
92:
|
Isuzu 5 speed Need help
(Archive: TD&Q - by Fiero_gtp, started: 01-01-2013, archived: 2016-03-23 10:11:03 CET)
okay so I've FINALLY gotten my 3800 swapped 85gt after quite a while. i used the Isuzu 5 speed due to not being able to afford the getrag at the time. and just another fun thing pops up. i used a spec stage 3 clutch brand new. and yet now when i start the car in neutral i cannot shift into any...
Score: 378, Size: 9976 bytes
|
93:
|
Aftermarket wheels for an 88 are a.....
(Archive: TD&Q - by Skybax, started: 10-25-2004, archived: 2006-08-11 13:06:14 CEST)
pain in the a*s. 16" or 17" rim that is 7" wide needs to be 48 to 50mm in the front..... no exceptions. And to find a rim you like that also has that same style in a 30 to 40mm offset for the rear is almost impossible.I prefer 16" which makes it even harder. (larger selection in 17") To make...
Score: 378, Size: 138784 bytes
|
94:
|
88 formula just got it this weekend
(Archive: TD&Q - by tehmaxfactr, started: 09-06-2011, archived: 2013-03-14 10:11:15 CET)
So I got an 88 formula with 107k miles on it. It also has factory t tops #1068 to be exact. I drove it back from the guys house the day before yesterday and had a few problems, nothing major. 1) the transmission with grind from time to time going into second and third but less going into 3rd. If I...
Score: 363, Size: 24158 bytes
|
95:
|
should i replace my TPS, a list of symptoms
(Archive: TD&Q - by MordacP, started: 03-11-2009, archived: 2010-04-21 09:19:17 CEST)
My idles hunts around slightly, i get a code 13 (oxy sensor failure) with a brand new oxygen sensor, my shift light doesn't act right, my MPGs aren't as good as they should be (16-18ish combined), and it stutters and stumbles a bit when i apply the throttle with no load on the motor (neutral).I...
Score: 363, Size: 12638 bytes
|
96:
|
whodeanie's 88 gt custom build
(Archive: TD&Q - by whodeanie, started: 03-20-2008, archived: 2010-04-21 09:19:31 CEST)
I guess this is as good a time as any to start posting my build project and let everyone know where it started form.In November 2007 I got this 88GT and it looked nice but needed work.some things I have done so far.new poly motor and trans mounts ( they were all Broke in two !)new poly suspension...
Score: 363, Size: 288333 bytes
|
97:
|
AJ's Northstar project
(Archive: TD&Q - by AJxtcman, started: 12-12-2006, archived: 2012-01-11 09:58:59 CET)
This is a great buildI purchased a 86 fiero in September. I had 2 Northstar engines in the shop. The first is a 1996 - 1999 and had about 5k mile on it, but the block had a bad casting. The other is a 2000 - 2002 disassembled. The 2000 is a better designed engine, but uses a Siemens PCM. The...
Score: 363, Size: 233707 bytes
|
98:
|
Do not use Chinese made rear bearing hubs.
(Archive: TD&Q - by Dennis LaGrua, started: 06-27-2011, archived: 2013-03-14 10:11:43 CET)
Just changed a read bearing hub today for a guy. He was one who decided to save money and install a Chinese made bearing hub on the rear left of his 3.4L Fiero. The owner told me that it never ran as quiet as the stock unit bit it worked, well for six months and 5 k miles! Then the grinding noise...
Score: 363, Size: 79229 bytes
|
99:
|
Starting a Duke overhaul with the standard improverments
(Archive: TD&Q - by White 84 SE, started: 05-08-2009, archived: 2011-05-02 10:43:48 CEST)
Starting a Duke overhaul on an 84 with 175,000 on her. Still runs pretty good!! but Im getting blow by, oil leaks and theres some rust to take care of. I will be: Doing a complete overhaul of an 84 Duke : Installing a performance camshaft and lifters : Installing a Holley...
Score: 363, Size: 129395 bytes
|
100:
|
clutch and flywheel 4.9
(Archive: TD&Q - by Niterrorz, started: 10-07-2010, archived: 2012-01-11 09:57:14 CET)
ok so ive seen WCF flywheel for the 4.9 and thats damn pricy i was wondering if there are any other options out there? i thought i saw a post about another place but cant seem to remember what its name was. also ive seen several posts about clutchnet VS spec and i also looked at thier clutchs and...
Score: 363, Size: 20216 bytes
|
| |
|
Put a PFF Search Box on your Site!