|
|
81:
|
Corvette ZR1 power steering rack: next project?
(Archive: TD&Q - by Rickady88GT, started: 01-05-2006, archived: 2013-03-14 10:11:53 CET)
I just got a Corvette ZR1 power steering rack and am planning on putting it into my next power steering equipt Fiero. So far it looks like a good choice. Almost the same travel as the Fiero. The Fiero has 5" of travel and the ZR1 rack has about .5" less. With wide tires this means nothing. And the...
Score: 392, Size: 247314 bytes
|
82:
|
HELP - all clutch experts please look inside
(Archive: TD&Q - by Formula350, started: 12-06-2009, archived: 2011-05-02 10:43:13 CEST)
I have been pulling my hair out over this clutch problem all week. Hopefully someone here can help me figure out what's wrong with my setup. First, the original symptom is that the clutch pedal would only go about half way down and seem to bottom out. The clutch would not disengage. I have replaced...
Score: 392, Size: 51474 bytes
|
83:
|
Cam question. "Staggered" lift numbers.
(Archive: TD&Q - by Raydar, started: 02-21-2005, archived: 2005-08-18 10:15:56 CEST)
I started really thinking about this when I put the 1.6 rockers on my 3.4.What I understand to be the stock Camaro cam provides a valve lift of .386/.387 for intake and exhaust, with stock rockers. With the 1.6 rockers I get .412/.413. The intake and exhaust lift are nearly identical.It seems that...
Score: 392, Size: 10645 bytes
|
84:
|
My 88 Northstar build thread
(Archive: TD&Q - by GSXRBOBBY, started: 01-04-2005, archived: 2016-03-23 10:12:16 CET)
Hello everybody, it is just after the New Year 2005. I started this Northstar project with my 86 GT I bought over a year ago. I have desided to do the Northstar swap on an 88 coupe. I like the brakes set up alot better on the 88 Fiero, its alot better design.I was going to use an 88 4 banger Fiero...
Score: 392, Size: 233107 bytes
|
85:
|
A little help from any old-school 'rodders?
(Archive: TD&Q - by Mach10, started: 07-23-2002, archived: 2002-11-04 12:08:40 CET)
Well, besides the heads being done, my new carb is on the engine... Runs MUCH nicer at idle, and doesn't stink as bad! But I STILL need to figure out my timing... At least I *THINK* I do...Before I stripped the heads out, at idle, in P, it'd rev just as happy as could be...But while driving, it...
Score: 392, Size: 26776 bytes
|
86:
|
Rear Wing - What does it really do?
(Archive: TD&Q - by Mr Schaefer, started: 06-27-2007, archived: 2009-02-19 10:45:19 CET)
Hey Guys...I just took the wing off my 88GT. Taking her out on the track this weekend and I decided that a 50% increase in rear visibility was worth the 1 minute modification My first drive with the wing off proved just how much of the window it blocks, I was amazed at how good my visibility is. ...
Score: 378, Size: 76708 bytes
|
87:
|
'88 Front wheel bearings
(Archive: TD&Q - by Tres-Fieros, started: 09-23-2010, archived: 2012-01-11 09:58:07 CET)
Does anyone know if there are other cars that share the sealed front wheel bearing of the '88 Fiero? I find the Fiero Store price a little hard to swallow. Will the rear bearing bolt in place?
Score: 378, Size: 33269 bytes
|
88:
|
Rodney's S10 Brake Booster - Review/Evaluation
(Archive: TD&Q - by fieroguru, started: 03-23-2012, archived: 2016-03-23 10:10:45 CET)
I was given the honor of reviewing/evaluating one of the prototype S10 style boosters for Rodney. As part of this review, I will be doing an in depth dimensional comparison between this booster and a stock fiero one and will eventually install it in an 88 fiero and verify the change in line...
Score: 378, Size: 147370 bytes
|
89:
|
Honda engines . . .
(Archive: TD&Q - by doriftu, started: 03-11-2003, archived: 2003-08-19 11:59:28 CEST)
: uts on flame suit::Once again, here I am, back with the sick engine swap ideas.What about swapping an integra type r engine into a fiero? It's light, high-output, and economical on gas.What about any honda engine?Please don't flame too much, just trying to get ideas out there, even if it will be...
Score: 378, Size: 74571 bytes
|
90:
|
M90 Supercharged 4.9 and Short Distributor w/ External coil
(Archive: TD&Q - by FriendOfYours, started: 08-13-2011, archived: 2016-03-23 10:10:36 CET)
Pics down below[This message has been edited by FriendOfYours (edited 08-16-2011).]
Score: 378, Size: 175499 bytes
|
| |
|
Put a PFF Search Box on your Site!