|
|
51:
|
Noise when clutch is disengaged
(Archive: TD&Q - by TuningForks250F, started: 06-09-2004, last post: 2004-10-15 10:17:37 CEST)
There is a clunk clunk clunk noise when I'm sitting still at idle with it in neutral. When I push the clutch in, it goes away. It's not LOUD, but it is very noticable. Can anyone please help me out as to what it might be?BTW - It's a Formula Thanks!
Score: 775, Size: 49 bytes
|
52:
|
Clutch do not fully disengage.
(Archive: TD&Q - by ebhan, started: 03-31-2001, last post: 2001-09-24 23:34:53 CEST)
After replacing the old clutch, pressure plate and throwout bearing on my 88 GT, the clutch do not fully disengage when pressing the pedal to the floor. A longer slave cylinder push-rod has been fitted (without putting pressure on the clutch in engaged position).The throw-out distance at the slave...
Score: 775, Size: 38 bytes
|
53:
|
Just replaced clutch/transmission, clicking sound when the clutch is disengaged
(Archive: TD&Q - by westtexas, started: 06-05-2002, last post: 2002-11-04 12:03:30 CET)
Somehow, I managed to get everything bolted together today after starting this project in January. When I started the car with the clutch pedal pushed in there's a regular clicking sound like a card is being hit by the non existant radiator fan. Rev the engine and it clicks faster. Let out the...
Score: 775, Size: 91 bytes
|
54:
|
Clutch Release Arm Stuck in the Disengaged Position
(Archive: TD&Q - by TheRealShadowX, started: 06-13-2013, last post: 2016-03-23 10:09:48 CET)
What gives? 4spd GT was stored for a few months, I go to drive it and there is a lot of clutch slip. Now there is no clutch at all. I investigate and the release arm is completely seized in the disengaged position. This common? Do I jut try to force it back? Gah. So frustrated I can barely think...
Score: 775, Size: 68 bytes
|
55:
|
Clutch stop disengaging
(Archive: TD&Q - by race9887, started: 11-22-2012, last post: 2016-03-23 10:11:16 CET)
Couple of weeks ago my clutch stopped disengaging (85 4cyl 5 speed Isuzu) found it was a bad master, replaced it bled and all was fine. Last night it stopped working again. Slave seems to have lots of movement. Lost on what to look for, any ideas on what is going on would be great.
Score: 775, Size: 34 bytes
|
56:
|
84 4 speed clutch squeel and won't disengage
(Archive: TD&Q - by rickn11, started: 12-07-2009, last post: 2011-05-02 10:43:28 CEST)
I have another thread going about this problem, but I also wanted to start a new one about the loud squeal when i depress the clutch pedal.I don't even get a grind when trying to shift gears. When trying to start in gear the car jumps. I have replaced the master, slave, and bent the clutch pedal...
Score: 775, Size: 54 bytes
|
57:
|
FIERO CLUTCH WONT DISENGAGE FLUID WAS LOW
(Archive: TD&Q - by SUPERDUTY TT FIERO, started: 12-18-2001, last post: 2002-03-19 10:55:34 CET)
HELP ANYONE I WAS DRIVING MY FIERO ONE DAY AND I WAS IN DRIVING AND ON THE WAY HOME THE STICK WAS WORKING FINE AND WHEN I WOKE UP AND THE CLUTCH WILL NOT DISENGAGE IS THIS BECAUSE THE TRANNY RAN LOW ON OIL?? DO I NEED A NEW TRANSMISSION?? THE CLUTCH IS ONLY 5 MONTHS OLD AND IT WORKS FINE WHEN IM IN...
Score: 775, Size: 62 bytes
|
58:
|
Clutch disengagement problems? Check this picture out....
(Archive: TD&Q - by Gary W, started: 05-25-2002, last post: 2002-08-25 11:46:19 CEST)
I was having problems with the clutch not releasing until the pedal was just off the floor. Bled, bled, cursed and bled, no good. I thought I finally tracked it down to a worn out banjo bushing on the pedal. So I got a bushing (thanks Rodney) and went to put it in.... WTF??? Check out the pivot...
Score: 775, Size: 66 bytes
|
59:
|
Car sat 4 months, clutch not disengaging good pedal pressure & travel wts/wrng?
(Archive: TD&Q - by Joseph Upson, started: 10-30-2006, last post: 2007-03-15 11:28:35 CET)
Finally got the car back together and started after removing exhaust system and leaving it parked for 4 months. Started it and tried to put it in gear without success. Bled the system with the left front corner elevated a little, I have good pedal pressure and travel ~1" but can't put the tranny...
Score: 775, Size: 94 bytes
|
60:
|
URGENT! NEED HELP ASAP! Clutch not disengaging
(Archive: TD&Q - by Racing_Master, started: 06-12-2011, last post: 2013-03-14 10:11:52 CET)
I am at work, Working all weekend, have been working for 25 hours straight on my car giving it a manual transmission. Went to bleed the clutch, all hell broke loose. No new parts. First I did the factory method, no go... so I did the Archie Method... it ended up sucking air through the salve...
Score: 775, Size: 62 bytes
|
| |
|
Put a PFF Search Box on your Site!