|
|
31:
|
Clutch will not disengage
(Archive: TD&Q - by bvander, started: 09-01-2011, last post: 2013-03-14 10:11:14 CET)
Hi,'87 Fiero Sport. 2.5 L4 71k miles Isuzu 5 spd.Clutch release problems occurred before anything was touched. Bought it with some problems but gradually got to the point it won't disengage maybe over about 200 miles. More on that later. Have replaced clutch master and slave and clutch peddle with...
Score: 775, Size: 35 bytes
|
32:
|
Getrag clutch engagement & disengagement on pedal travel
(Archive: TD&Q - by Skybax, started: 06-06-2005, last post: 2006-02-06 11:46:55 CET)
I test drove a black 87 GT with 35,000 miles today that is for sale locally. The car is bone stock. It's a beautiful one owner car. The 5-speed Getrag clutch and shifting operation is perfect, but it seems a little high on the pedal compared to mine.Here is what it looked like...I was curious what...
Score: 775, Size: 65 bytes
|
33:
|
Clutch Won't Disengage!
(Archive: TD&Q - by Delphince, started: 12-19-2005, last post: 2006-08-11 13:11:20 CEST)
Just to start off with, as far as I know, this isn't one of the typical clutch problems.OK -- Isuzu trannie and throw-out bearing; V6 clutch assembly, flywheel, and engine. The clutch is rebuilt and has no bleedback. The system is bled and air-free, giving 15/16" of throw. The throw arm is cast...
Score: 775, Size: 35 bytes
|
34:
|
Clutch Wont Disengage
(Archive: TD&Q - by TheIdealSociety, started: 03-06-2005, last post: 2005-08-18 10:15:39 CEST)
Vehicle:1985 Fiero GT V6 4spd manual transmissionok now ive been working on this for some time now and im just finally frustrated to no end... the clutch doesnt want to seem to disengage enough to be put into gear when the car is running. Things ive done to try and remedy the problem: 1:replaced...
Score: 775, Size: 39 bytes
|
35:
|
Clutch not disengaging
(Archive: TD&Q - by fyreTrap, started: 02-09-2009, last post: 2010-04-21 09:19:00 CEST)
I have an 84 2.5 5 speed and the clutch is not fully disengaging. In the past year I've installed a new Isuzu trans, Stage II clutch, pressure plate, TO bearing, master/slave cylinders. I drove the car for about 2 months after this rebuild and the clutch recently got worse. I tried bleeding the...
Score: 775, Size: 33 bytes
|
36:
|
Yet another clutch disengagement Q
(Archive: TD&Q - by NoFiero, started: 05-09-2005, last post: 2005-08-18 10:13:34 CEST)
First off just a general question about the point in travel that the clutch disengages at on the clutch peddle. On my car it seems to be rather low for my taste somewhere I would guess in the last 1 inch of travel. Also it will grind going into reverse unless I hit a synchro first. I have an 85se...
Score: 775, Size: 44 bytes
|
37:
|
Clutch won't disengage!
(Archive: TD&Q - by RilesOfSmiles, started: 03-03-2013, last post: 2016-03-23 10:10:41 CET)
Hello everyone this is my first time posting on this forum and unfortunately it isn't under very good circumstances. This forum has been an extremely helpful resource for me for the past 2 years and I couldn't have kept my car on the road without it. The problem I have is no clutch disengagement....
Score: 775, Size: 39 bytes
|
38:
|
Tricky Clutch won't disengage through full stroke.
(Archive: TD&Q - by FreakyFastFiero, started: 01-08-2012, last post: 2013-03-14 10:10:24 CET)
First things first. I searched PFF and didn't find an answer. I have an 87 GT Getrag. I have bled the clutch fully through the gravity method and the slave as well. I bled almost a quart through the system. I have the steel clutch pedal so I assume it is not bent, although it can make it all the...
Score: 775, Size: 68 bytes
|
39:
|
Bent clutch arm and pedal info please,no disengagement.
(Archive: TD&Q - by DefEddie, started: 06-12-2010, last post: 2012-01-11 09:58:58 CET)
Yo,having an issue with a clutch.I'm an auto tech,but try to stay away from trans in general and have somehow kept away from manual trans especially so need some help please.I have an 87 4cyl 5spd that I cannot get the clutch to disengage.When I bought it,the clutch master was missing.Bought new...
Score: 775, Size: 66 bytes
|
40:
|
Clutch wont fully disengage!
(Archive: TD&Q - by FieroMaster88, started: 07-02-2002, last post: 2002-11-04 12:06:13 CET)
Well..this weekend I replaced my transmission and my clutch. After I finished, I hopped in my car, started it up and I couldnt get it into any gear. Before I changed the trans it worked great. Today was the first day I have had to mess with it. I followed Archie's suggestions on his page,...
Score: 775, Size: 44 bytes
|
| |
|
Put a PFF Search Box on your Site!