|
|
1:
|
slave cylinder wont move the clutch arm far enough to disengage clutch. help
(Archive: TD&Q - by GTMike, started: 09-13-2002, last post: 2003-02-04 11:38:26 CET)
this is on and 87 gt 5speed first i though it was my slave cylinder. so i bought a new slave cylinder put it in and bead it. the same thing. it wont move far enough to disengage. could something inside my bell housing be out of wack. this was a slow process. it started to get hard to shift...
Score: 1000, Size: 85 bytes
|
2:
|
clutch wont fully disengage
(General Fiero Chat - by fierofrenzy, started: 03-02-2016, last post: 2016-03-07 04:28:09 CET)
Hey you all....what do you make of this ? my clutch won't fully disengage. When I push the peddal initally down, it seems to work OK. I'll put it in gear, pull away, then loss it to the point where I can't shift the car. I fully bleeded the line with one of those bleeder pump tools, and also did...
Score: 775, Size: 39 bytes
|
3:
|
Clutch disengagement
(Technical Discussion & Questions - by Heinz_57_Fiero, started: 05-10-2015, last post: 2015-05-11 15:48:58 CEST)
I''m having a strange clutch related problem. I cannot get the car into any gear after it has sat overnight. In order to disengage the clutch, I have to start it in gear. It will lurch forward and stall. Then, the clutch will disengage and I can get it into gear and drive all day normally. After...
Score: 775, Size: 35 bytes
|
4:
|
Clutch won't disengage, please help!
(Technical Discussion & Questions - by jschmidt95, started: 12-20-2013, last post: 2014-02-05 01:06:25 CET)
Patient: My 1986 stock V6 4speed notchback. So about a week ago, my daily driver started having problems shifting into first gear and reverse, over the course of the week the problem GRADUALLY got worse. I figured it was a shifter problem so I replaced the cables, put in all new bushings (Thanks...
Score: 775, Size: 49 bytes
|
5:
|
Yet another my clutch wont disengage thread
(Technical Discussion & Questions - by shemdogg, started: 05-15-2023, last post: 2023-05-24 05:46:27 CEST)
I read up on all the threads on this. I bled the clutch w the pump bleeder and w the gravity and 2 person method. Clutch feels great. Slave arm only moves about 5/8", clutch pedal is level w the brake, both I know are wrong. Suspected the pedal was bent but it looks square, even put my framing...
Score: 775, Size: 52 bytes
|
6:
|
New clutch won't disengage, HELP
(Technical Discussion & Questions - by FieroCat, started: 10-14-2016, last post: 2016-10-18 00:32:41 CEST)
So I just finished rebuilding my 2.8 V6 engine and re-installed it in the car with a new clutch, throwout bearing and re-surfaced flywheel. And upon trying to put it in gear, I found that the clutch will not release. There is a good inch of throw in the slave cylinder, so no problems with the...
Score: 775, Size: 41 bytes
|
7:
|
Clutch won't disengage
(Technical Discussion & Questions - by Saggy, started: 08-21-2020, last post: 2020-08-21 22:41:28 CEST)
I have a 1984 Fiero SE. when I got it, the provious owner said I had to pump the clutch to get it too work, and thats why it had been sitting for 3 years. I bled the clutch line and it worked just fine. Then, once I dealt with some other bits to get it on the road, I learned the issue was the...
Score: 775, Size: 29 bytes
|
8:
|
New steel clutch pedal, fully bled. still not disengaging - looking for ideas
(Technical Discussion & Questions - by tywhitaker, started: 12-11-2013, last post: 2013-12-13 02:09:01 CET)
Hello everybody.Been struggling with this ever since putting it all back together after a tranny rebuild. I have an 84 se with a 5-speed tranny out of an 86. Thought it was the tranny at first, but clutch will disengage fully if I pre-load it a bit.I have an inch of travel, all new components,...
Score: 775, Size: 88 bytes
|
9:
|
New Fiero Store HD Clutch - won't disengage
(Technical Discussion & Questions - by Synthesis, started: 05-09-2016, last post: 2016-05-14 05:26:07 CEST)
seajai and I spent this past weekend tearing the engine out of my 86GT and replacing the timing set (1+ inch of play without the guide), water pump, oil pan gasket and the flywheel/clutch/pressure plate and throwout bearing.We installed a brand new Fiero Store HD Clutch kit for the car to replace...
Score: 775, Size: 54 bytes
|
10:
|
Help! Clutch won't disengage completely
(Technical Discussion & Questions - by BenL, started: 12-31-2014, last post: 2015-01-07 21:55:17 CET)
[Posted for a reddit user, as he is awaiting account approval here.] **As such, they may not be able to respond to this post in a timely manner, but will follow the thread.** 1984 Pontiac Fiero 2.5 Litre 5 Speed Manual All stock. No mods, etc.So 7 months ago I fired up my Fiero to drive it for...
Score: 775, Size: 45 bytes
|
| |
|
Put a PFF Search Box on your Site!