|
|
41:
|
88 GT clutch not disengaging
(Archive: TD&Q - by GOT2B GM, started: 04-22-2009, last post: 2011-05-02 10:44:40 CEST)
Hi everyone, I realize there are a lot of topics regarding this subject, but I just wanted to hear everyones thoughts on my situation.88 Fiero GT, 131,000 kms, Getrag 282Some points:-Clutch does not slip under load.-Car needs to be shut off to shift into 1st or Reverse.-All gears can be easily...
Score: 775, Size: 39 bytes
|
42:
|
clutch not disengaging?
(Archive: TD&Q - by Darth_Salmon, started: 01-17-2012, last post: 2013-03-14 10:10:18 CET)
So one day I was leaving the mall and my pedal just sunk to the floor. I let it go and it came back up and everything was fine. 8 miles away from base my clutch just stopped disengaging altogether but the pedal still goes down but it stops about a half inch to an inch before it usually does. I...
Score: 775, Size: 38 bytes
|
43:
|
clutch not disengaging
(Archive: TD&Q - by philbur120, started: 10-10-2008, last post: 2010-04-21 09:20:33 CEST)
well before i assume the worst, what can cause a clutch to not disengage properly? I have a spec stage 3 on my northstar 4 speed. I just gravity bled the system and bled the slave cylinder so i do not think air is in the system. The clutch assembly and flywheel only have about 3000 miles on it, as...
Score: 775, Size: 35 bytes
|
44:
|
clutch wont disengage!!
(Archive: TD&Q - by fierose87, started: 05-24-2005, last post: 2006-02-06 11:47:23 CET)
ok this car is really making me upset.i couldnt bleed the clutch myself so i had the car towed to a shop they finally got it bled after a couple hours.they say it has 1-1.5 inches of travel at the slave. but the clutch still wont dissengage. what else could be wrong. i know to check the pedel to...
Score: 775, Size: 36 bytes
|
45:
|
Clutch not disengaging after new engine/clutch install
(Archive: TD&Q - by yellowstone, started: 12-18-2005, last post: 2006-08-11 13:07:01 CEST)
I have installed a rebuild V6 and a Fiero Store HD clutch kit in my 87 GT. The clutch hydraulic system was not opened (hung the slave cyl. with a wire). Clutch worked fine before reinstall. Now the pedal has very little resistance all the way down and the slave cyl rod moves about 3/4 inch but no...
Score: 775, Size: 68 bytes
|
46:
|
Clutch not disengaging
(Archive: TD&Q - by JohnnyK, started: 04-09-2000, last post: 2000-10-19 11:26:39 CEST)
I have an 85se 4cyl 5spd with a very annoying clutch.. It will not engage into first while moving, or sometimes into second, but the main problem is I really have to push against the footrests to shift... First I am going to bleed the clutch to see if that is the problem, but I read somewhere that...
Score: 775, Size: 32 bytes
|
47:
|
Clutch chatter when disengaged
(Archive: TD&Q - by Black88GT, started: 07-10-2001, last post: 2002-02-08 14:45:32 CET)
Just when ya thought the clutch questions were over.If I am sitting at idle, it chatters, but when I engage it, its quiet. What causes this? I looked in my manuals and it said clutch release bearing or input gear bearing. Which do you guys think? Any way to test for sure?thanks
Score: 775, Size: 42 bytes
|
48:
|
Clutch disengagement problems
(Archive: TD&Q - by Formula88, started: 12-17-2001, last post: 2002-05-11 09:54:59 CEST)
Ok, got a question. 88 Formula 5-speed. New clutch, pressure plate and throw out bearing installed this past weekend. Resurfaced the flywheel, too. Now I don't get disengagement. The hydraulics appear ok. We've replaced both the master and slave cylinders and bled the system till all the old...
Score: 775, Size: 41 bytes
|
49:
|
My Clutch Won't Disengage
(Archive: TD&Q - by MontanaFiero, started: 09-29-2001, last post: 2002-02-08 14:47:42 CET)
Okay, nevermind the headlight problem --->>>the damned car won't even move!my car: '86 SEdrive train: 3.4L V-6, and 4 Speedhistory: Car sat for 5 years after previous owner threw a rod bearing in his 2.8. He just replaced the clutch, so apparently he was having clutch problems. I put a...
Score: 775, Size: 40 bytes
|
50:
|
Getrag experts... clutch not fully disengaging
(Archive: TD&Q - by Skybax, started: 03-19-2005, last post: 2005-08-18 10:15:00 CEST)
Ok... please read carefully.88 GT 5-speed with 50k miles. Mostly highway miles by an adult driver.This winter when I decided to do a bunch of work to the car, one of the things was to replace the clutch operating system. Why? Because was only getting about 3/4" throw on the slave by my...
Score: 775, Size: 55 bytes
|
| |
|
Put a PFF Search Box on your Site!