1721:
|
Did I get the wrong 4.9 idler pulley?
(Archive: TD&Q - by Exodus5, started: 08-25-2004, last post: 2005-01-19 11:10:59 CET)
I got an idler pulley from the local Carquest for a 90 Astro Van w/4.3 and no AC. I thought this is what I was supposed to get, but I've since seen others saying its from a 93 van? This pulley is smooth (no belt ridges) so is it the right one or not? I also got the 3.4 tensioner, so I think...
Score: 499, Size: 47 bytes
|
1722:
|
another 4.9 question. redline?
(Archive: TD&Q - by Philphine, started: 11-13-2001, last post: 2002-03-19 10:54:06 CET)
i was looking at the asg 5.0 page and noticed something. they show performance #'s up to 4900rpm like a stock 4.9, but under the chart there's a note. it says their engine actualy makes more hp peaking at 6000rpm but the shift points of the stock tranny limit rpm to 4900.i know there is going to be...
Score: 499, Size: 42 bytes
|
1723:
|
What size bolt is used to bolt trans to 4.9
(Archive: TD&Q - by windsweptfiero, started: 06-09-2004, last post: 2004-10-15 10:17:40 CEST)
Me again...I need to bolt my engine stand to my 4.9 and the only place in town has to order them so I need to know for sure.I was told 10mm x 1.75 and also 10mm x 1.50 which one is it?Thanks,Paul
Score: 499, Size: 60 bytes
|
1724:
|
PCM for 4.9/ 4T60E and 2 bar MAP?
(Archive: TD&Q - by vafierro, started: 03-16-2007, last post: 2009-02-19 10:45:00 CET)
I'm still working to select an ECU for a 4.9 caddy turbo. The ECM needs to be able to control both the 4.9 engine with 2bar MAP as well as the 4T60E tranny. I'd much rather do this than run and FMU but I'm still keeping that as an option at this point.What are my real options here? I've got friends...
Score: 499, Size: 44 bytes
|
1725:
|
how to read code 1992 4.9 engine
(Archive: TD&Q - by mmapb, started: 05-02-2009, last post: 2011-05-02 10:44:39 CEST)
what type of scan tool is needed to read check engine light code
Score: 499, Size: 40 bytes
|
1726:
|
4.9 ?'s and some help needed
(Archive: TD&Q - by fierodustin_86, started: 12-29-2005, last post: 2006-08-11 13:09:32 CEST)
1st, does anyone have any avenues for getting the chips burnt. 2nd, need some pics of belt routings and info on any extra pulleys. 3rd, any special info on the wiring. My stepson just bought his engine and trans from a 92 Eldorado and got everything he needed for $850.00. I thought that it was a...
Score: 499, Size: 45 bytes
|
1727:
|
How do I check timing on 4.9 ?
(Archive: TD&Q - by SeafordMX, started: 03-16-2009, last post: 2010-04-21 09:19:13 CEST)
I want to make sure the timing is set right on my 94' caddy 4.9 engine.Is there anything that needs to be done prior to hooking my timing light to cyl #1?
Score: 499, Size: 42 bytes
|
1728:
|
4.9 swap
(Archive: TD&Q - by ohio86se, started: 10-05-2004, last post: 2005-01-19 11:09:24 CET)
im seriously concidering a 4.9 engine swap but i would to see some pictures of the engine bays and see what could be done to clean it up to look more organized. im kind of a stickler for appearances as well as good preformance.thanks
Score: 499, Size: 19 bytes
|
1729:
|
swapping valve covers 4.9
(Archive: TD&Q - by jeffndebrus, started: 07-05-2004, last post: 2004-10-15 10:16:45 CEST)
My question is about swapping the valve covers on the 4.9 to gain the oil fill access towards the rear of the car.It appears that the valve cover which does not have the oil fill cap has a lot of little screws tapped into it. How have you overcome this problem--if I switch valve covers--will I have...
Score: 499, Size: 39 bytes
|
1730:
|
4.9 SWAP
(Archive: TD&Q - by sc2m6, started: 02-18-2008, last post: 2009-09-07 11:05:11 CEST)
HEY EVERYONE!! I need some help... I have an 84 se 4 speed. I now have a place to work on my fiero and I want to do a swap. my grandmother has a caddy with the 4.9 in it. and my brother has a camaro with a nice 2.8 in it. I would really like to do the 4.9 swap. in comparison to both which would...
Score: 499, Size: 16 bytes
|
|