|
|
51:
|
Noise when clutch is disengaged
(Archive: TD&Q - by TuningForks250F, started: 06-09-2004, last post: 2004-10-15 10:17:37 CEST)
There is a clunk clunk clunk noise when I'm sitting still at idle with it in neutral. When I push the clutch in, it goes away. It's not LOUD, but it is very noticable. Can anyone please help me out as to what it might be?BTW - It's a Formula Thanks!
Score: 775, Size: 49 bytes
|
52:
|
slave cylinder wont move the clutch arm far enough to disengage clutch. help
(Archive: TD&Q - by GTMike, started: 09-13-2002, last post: 2003-02-04 11:38:26 CET)
this is on and 87 gt 5speed first i though it was my slave cylinder. so i bought a new slave cylinder put it in and bead it. the same thing. it wont move far enough to disengage. could something inside my bell housing be out of wack. this was a slow process. it started to get hard to shift...
Score: 1000, Size: 85 bytes
|
53:
|
Clutch wont fully disengage!
(Archive: TD&Q - by FieroMaster88, started: 07-02-2002, last post: 2002-11-04 12:06:13 CET)
Well..this weekend I replaced my transmission and my clutch. After I finished, I hopped in my car, started it up and I couldnt get it into any gear. Before I changed the trans it worked great. Today was the first day I have had to mess with it. I followed Archie's suggestions on his page,...
Score: 775, Size: 44 bytes
|
54:
|
Just replaced clutch/transmission, clicking sound when the clutch is disengaged
(Archive: TD&Q - by westtexas, started: 06-05-2002, last post: 2002-11-04 12:03:30 CET)
Somehow, I managed to get everything bolted together today after starting this project in January. When I started the car with the clutch pedal pushed in there's a regular clicking sound like a card is being hit by the non existant radiator fan. Rev the engine and it clicks faster. Let out the...
Score: 775, Size: 91 bytes
|
55:
|
Clutch disengagement problems? Check this picture out....
(Archive: TD&Q - by Gary W, started: 05-25-2002, last post: 2002-08-25 11:46:19 CEST)
I was having problems with the clutch not releasing until the pedal was just off the floor. Bled, bled, cursed and bled, no good. I thought I finally tracked it down to a worn out banjo bushing on the pedal. So I got a bushing (thanks Rodney) and went to put it in.... WTF??? Check out the pivot...
Score: 775, Size: 66 bytes
|
56:
|
Centerforce DF201502 clutch barely disengages
(Archive: TD&Q - by Will, started: 05-14-2002, last post: 2002-08-25 11:46:18 CEST)
When I installed the CF clutch, I didn't open the hydraulic system. Now it doesn't disengage completely. I bled about 4 reservoirs of fluid through it and it got worse. It worked fine before I put the CF clutch in.WTF is going on?Does this clutch take more throw to disengage than the stock unit?Can...
Score: 775, Size: 52 bytes
|
57:
|
Clutch disengagement problems
(Archive: TD&Q - by Formula88, started: 12-17-2001, last post: 2002-05-11 09:54:59 CEST)
Ok, got a question. 88 Formula 5-speed. New clutch, pressure plate and throw out bearing installed this past weekend. Resurfaced the flywheel, too. Now I don't get disengagement. The hydraulics appear ok. We've replaced both the master and slave cylinders and bled the system till all the old...
Score: 775, Size: 41 bytes
|
58:
|
FIERO CLUTCH WONT DISENGAGE FLUID WAS LOW
(Archive: TD&Q - by SUPERDUTY TT FIERO, started: 12-18-2001, last post: 2002-03-19 10:55:34 CET)
HELP ANYONE I WAS DRIVING MY FIERO ONE DAY AND I WAS IN DRIVING AND ON THE WAY HOME THE STICK WAS WORKING FINE AND WHEN I WOKE UP AND THE CLUTCH WILL NOT DISENGAGE IS THIS BECAUSE THE TRANNY RAN LOW ON OIL?? DO I NEED A NEW TRANSMISSION?? THE CLUTCH IS ONLY 5 MONTHS OLD AND IT WORKS FINE WHEN IM IN...
Score: 775, Size: 62 bytes
|
59:
|
My Clutch Won't Disengage
(Archive: TD&Q - by MontanaFiero, started: 09-29-2001, last post: 2002-02-08 14:47:42 CET)
Okay, nevermind the headlight problem --->>>the damned car won't even move!my car: '86 SEdrive train: 3.4L V-6, and 4 Speedhistory: Car sat for 5 years after previous owner threw a rod bearing in his 2.8. He just replaced the clutch, so apparently he was having clutch problems. I put a...
Score: 775, Size: 40 bytes
|
60:
|
clutch won't disengage
(Archive: TD&Q - by heavyhorse, started: 08-17-2001, last post: 2002-02-08 14:46:28 CET)
My friend has a 1984 Indy fiero with a 4 speed and a 4 cylinder. He has ahd multiple problems with his clutch system over the years, but this one baffles me. He has a new master cylinder, new slave cylinder, the shift fork was replaced a couple years ago with an upgraded fork since his was bent,...
Score: 775, Size: 35 bytes
|
| |
|
Put a PFF Search Box on your Site!