|
|
21:
|
Clutch not disengaging completely
(Technical Discussion & Questions - by LovesGoldens, started: 08-14-2015, last post: 2015-08-14 22:35:11 CEST)
1988 GT with 5 speed manual trans. With my clutch petal pushed to the floor, the reverse gear is still turning I must force it in gear and the car will start to move backward. I have new master and slave and have used over a quart of fluid to bleed the system.The clutch petal is soft for about 2"...
Score: 775, Size: 46 bytes
|
22:
|
Clutch disengagement
(Technical Discussion & Questions - by Heinz_57_Fiero, started: 05-10-2015, last post: 2015-05-11 15:48:58 CEST)
I''m having a strange clutch related problem. I cannot get the car into any gear after it has sat overnight. In order to disengage the clutch, I have to start it in gear. It will lurch forward and stall. Then, the clutch will disengage and I can get it into gear and drive all day normally. After...
Score: 775, Size: 35 bytes
|
23:
|
Chattering noise when clutch disengaged, 88, 5-speed, stock V6 engine
(Technical Discussion & Questions - by rinselberg, started: 08-04-2014, last post: 2015-04-30 00:43:22 CEST)
I searched here, and there was this other thread, but this is different.I only hear the noise when the clutch is disengaged. When I am idling in neutral at a stop light, there is no noise unless I rest my foot on the clutch pedal. Even the slightest pressure on the clutch pedal brings on the noise....
Score: 775, Size: 80 bytes
|
24:
|
Help! Clutch won't disengage completely
(Technical Discussion & Questions - by BenL, started: 12-31-2014, last post: 2015-01-07 21:55:17 CET)
[Posted for a reddit user, as he is awaiting account approval here.] **As such, they may not be able to respond to this post in a timely manner, but will follow the thread.** 1984 Pontiac Fiero 2.5 Litre 5 Speed Manual All stock. No mods, etc.So 7 months ago I fired up my Fiero to drive it for...
Score: 775, Size: 45 bytes
|
25:
|
New clutch in my fresh 4.9 swap will not disengage
(Technical Discussion & Questions - by Meanspiritdave, started: 10-22-2014, last post: 2014-11-11 20:27:51 CET)
I have been slowly but surely building my first swap. The car is an '86 GT with the Muncie 4 speed. We have installed a '92 4.9 utilizing a flywheel from LSC, and the 84-86 4spd 9.75" HD Clutch Kit from the Fiero store. Everything went together perfectly. The motor is running great. Now the clutch...
Score: 775, Size: 65 bytes
|
26:
|
Clutch won't disengage, please help!
(Technical Discussion & Questions - by jschmidt95, started: 12-20-2013, last post: 2014-02-05 01:06:25 CET)
Patient: My 1986 stock V6 4speed notchback. So about a week ago, my daily driver started having problems shifting into first gear and reverse, over the course of the week the problem GRADUALLY got worse. I figured it was a shifter problem so I replaced the cables, put in all new bushings (Thanks...
Score: 775, Size: 49 bytes
|
27:
|
New steel clutch pedal, fully bled. still not disengaging - looking for ideas
(Technical Discussion & Questions - by tywhitaker, started: 12-11-2013, last post: 2013-12-13 02:09:01 CET)
Hello everybody.Been struggling with this ever since putting it all back together after a tranny rebuild. I have an 84 se with a 5-speed tranny out of an 86. Thought it was the tranny at first, but clutch will disengage fully if I pre-load it a bit.I have an inch of travel, all new components,...
Score: 775, Size: 88 bytes
|
28:
|
URGENT! NEED HELP ASAP! Clutch not disengaging
(Archive: TD&Q - by Racing_Master, started: 06-12-2011, last post: 2013-03-14 10:11:52 CET)
I am at work, Working all weekend, have been working for 25 hours straight on my car giving it a manual transmission. Went to bleed the clutch, all hell broke loose. No new parts. First I did the factory method, no go... so I did the Archie Method... it ended up sucking air through the salve...
Score: 775, Size: 62 bytes
|
29:
|
Clutch will not disengage
(Archive: TD&Q - by bvander, started: 09-01-2011, last post: 2013-03-14 10:11:14 CET)
Hi,'87 Fiero Sport. 2.5 L4 71k miles Isuzu 5 spd.Clutch release problems occurred before anything was touched. Bought it with some problems but gradually got to the point it won't disengage maybe over about 200 miles. More on that later. Have replaced clutch master and slave and clutch peddle with...
Score: 775, Size: 35 bytes
|
30:
|
Tricky Clutch won't disengage through full stroke.
(Archive: TD&Q - by FreakyFastFiero, started: 01-08-2012, last post: 2013-03-14 10:10:24 CET)
First things first. I searched PFF and didn't find an answer. I have an 87 GT Getrag. I have bled the clutch fully through the gravity method and the slave as well. I bled almost a quart through the system. I have the steel clutch pedal so I assume it is not bent, although it can make it all the...
Score: 775, Size: 68 bytes
|
| |
|
Put a PFF Search Box on your Site!