|
|
41:
|
Clutch does not disengaged
(Archive: TD&Q - by falcon_ca, started: 03-08-2008, last post: 2009-09-07 11:05:02 CEST)
Hi,Here is the story:This is a FWD Cadillac Cimarron Getrag H282 Transmission freshly installed in my 88 Formula.I am redoing a lot of things on the engine, transmission and suspension.On the transmission, I installed a new Stage 1 clutch, Rodney's FWD conversion Kit and Ultimate Getrag Shift...
Score: 775, Size: 38 bytes
|
42:
|
Car sat 4 months, clutch not disengaging good pedal pressure & travel wts/wrng?
(Archive: TD&Q - by Joseph Upson, started: 10-30-2006, last post: 2007-03-15 11:28:35 CET)
Finally got the car back together and started after removing exhaust system and leaving it parked for 4 months. Started it and tried to put it in gear without success. Bled the system with the left front corner elevated a little, I have good pedal pressure and travel ~1" but can't put the tranny...
Score: 775, Size: 94 bytes
|
43:
|
Clutch Won't Disengage!
(Archive: TD&Q - by Delphince, started: 12-19-2005, last post: 2006-08-11 13:11:20 CEST)
Just to start off with, as far as I know, this isn't one of the typical clutch problems.OK -- Isuzu trannie and throw-out bearing; V6 clutch assembly, flywheel, and engine. The clutch is rebuilt and has no bleedback. The system is bled and air-free, giving 15/16" of throw. The throw arm is cast...
Score: 775, Size: 35 bytes
|
44:
|
Clutch not disengaging after new engine/clutch install
(Archive: TD&Q - by yellowstone, started: 12-18-2005, last post: 2006-08-11 13:07:01 CEST)
I have installed a rebuild V6 and a Fiero Store HD clutch kit in my 87 GT. The clutch hydraulic system was not opened (hung the slave cyl. with a wire). Clutch worked fine before reinstall. Now the pedal has very little resistance all the way down and the slave cyl rod moves about 3/4 inch but no...
Score: 775, Size: 68 bytes
|
45:
|
clutch wont disengage!!
(Archive: TD&Q - by fierose87, started: 05-24-2005, last post: 2006-02-06 11:47:23 CET)
ok this car is really making me upset.i couldnt bleed the clutch myself so i had the car towed to a shop they finally got it bled after a couple hours.they say it has 1-1.5 inches of travel at the slave. but the clutch still wont dissengage. what else could be wrong. i know to check the pedel to...
Score: 775, Size: 36 bytes
|
46:
|
Getrag clutch engagement & disengagement on pedal travel
(Archive: TD&Q - by Skybax, started: 06-06-2005, last post: 2006-02-06 11:46:55 CET)
I test drove a black 87 GT with 35,000 miles today that is for sale locally. The car is bone stock. It's a beautiful one owner car. The 5-speed Getrag clutch and shifting operation is perfect, but it seems a little high on the pedal compared to mine.Here is what it looked like...I was curious what...
Score: 775, Size: 65 bytes
|
47:
|
Clutch Wont Disengage
(Archive: TD&Q - by TheIdealSociety, started: 03-06-2005, last post: 2005-08-18 10:15:39 CEST)
Vehicle:1985 Fiero GT V6 4spd manual transmissionok now ive been working on this for some time now and im just finally frustrated to no end... the clutch doesnt want to seem to disengage enough to be put into gear when the car is running. Things ive done to try and remedy the problem: 1:replaced...
Score: 775, Size: 39 bytes
|
48:
|
Getrag experts... clutch not fully disengaging
(Archive: TD&Q - by Skybax, started: 03-19-2005, last post: 2005-08-18 10:15:00 CEST)
Ok... please read carefully.88 GT 5-speed with 50k miles. Mostly highway miles by an adult driver.This winter when I decided to do a bunch of work to the car, one of the things was to replace the clutch operating system. Why? Because was only getting about 3/4" throw on the slave by my...
Score: 775, Size: 55 bytes
|
49:
|
Clutch Won't Disengage After Replacement!!
(Archive: TD&Q - by eatoninside, started: 04-15-2005, last post: 2005-08-18 10:14:23 CEST)
So my cousin replaced his clutch on his 88 GT. I showed him how to put it all together and he did all the wrenching. he got it back together and the clutch won't disengage. The slave cylinder was never unhooked, so we know there isn't air in the line, and we even bled it to make sure anyway. ...
Score: 775, Size: 56 bytes
|
50:
|
Yet another clutch disengagement Q
(Archive: TD&Q - by NoFiero, started: 05-09-2005, last post: 2005-08-18 10:13:34 CEST)
First off just a general question about the point in travel that the clutch disengages at on the clutch peddle. On my car it seems to be rather low for my taste somewhere I would guess in the last 1 inch of travel. Also it will grind going into reverse unless I hit a synchro first. I have an 85se...
Score: 775, Size: 44 bytes
|
| |
|
Put a PFF Search Box on your Site!