|
|
1:
|
Another SPEC bites the dust
(Archive: TD&Q - by arte444, started: 10-14-2007, archived: 2009-02-19 10:44:19 CET)
Well i'm proud to announce that the $300 spec 3 (sc883) clutch has finally exploded after only 3 months and maybe 1500 miles. I'm not very happy at this time. I have a 4.9L v8 isuzu 5spd with a custom flywheel from LSC performance.I've attached some pictures of the damage, basically the springs in...
Score: 1000, Size: 174651 bytes
|
2:
|
Clutch Problem (yes another one) Need help
(Archive: TD&Q - by My1stMidEng, started: 03-30-2011, archived: 2013-03-14 10:12:18 CET)
I just got finished with my 3800sc swap in my 88 w/getrad. It started right up too!!! But, the clutch will not disengage. I installed a new Spec 3 with aluminum flywheel package. The slave cylinder is new last year and had it working great with the 2.8. I bled the thing twice with a vacume...
Score: 771, Size: 35426 bytes
|
3:
|
Can I trust my Fiero to the alignment shop?
(Archive: TD&Q - by perceptionist, started: 11-07-2007, archived: 2009-09-07 11:04:53 CEST)
I have heard many horror stories about auto service shops not knowing what they are dealing with when confronted with our fieros which usually results in something getting screwed up. I suppose this is why it has been said "if you are not a do it your selfer, Fieros are not for you"Well, I do...
Score: 731, Size: 38484 bytes
|
4:
|
YABT (Yet Another Build Thread) - 3.4 TDC Into An 87' GT 5 Speed
(Archive: TD&Q - by Blue Shift, started: 02-12-2005, archived: 2009-09-07 11:04:54 CEST)
I've asked questions, I've done my research, and I've been compiling parts and taking pictures as I go. I'm almost ready to start installing in a bit here once I get a few things taken care of. There's a few areas I'm not absolutely positive on, but I think I'll figure them out when I'm there - and...
Score: 715, Size: 502909 bytes
|
5:
|
spec clutches
(Archive: TD&Q - by i151, started: 12-16-2008, archived: 2011-05-02 10:43:12 CEST)
well i had a spec stage 3 clutch, and its busted...it came in the car and the guy who built the car talked very highly of it. and now after reading on them in past threads on here i've learned alot of people had them go bad...so have they reworked their design?..what other clutches are u guys going...
Score: 686, Size: 31949 bytes
|
6:
|
Northstar 6 Speed
(Archive: TD&Q - by Zac88GT, started: 09-21-2007, archived: 2010-04-21 09:19:45 CEST)
Well i didn't want to start this thread until i was finished but i guess i will just post the work as it gets done. The big question was can a northstar be mated to an G6 6 speed and it can. The first step i went through is getting the trans to bolt up to the engine. The right side of the...
Score: 665, Size: 160407 bytes
|
7:
|
UPDATE: The Turbo Ecotec Fiero
(Archive: TD&Q - by fieroturbo, started: 01-17-2004, archived: 2013-03-14 10:11:40 CET)
Hey guys!Since my site is working like a horse with a broken leg, I figured I'd post updates here.So far, I have:- Complete stock Ecotec 2.2 motor with 5,000 miles ($700, paid for and is on its way)- 5-speed tranny ($300, on hold for me until I get back to the US)- Garret T3/T4 hybrid turbo-...
Score: 642, Size: 651257 bytes
|
8:
|
N* Spec Clutch/Aluminum Flywheel interference ?
(Archive: TD&Q - by IXSLR8, started: 11-15-2008, archived: 2010-04-21 09:19:48 CEST)
Have any of you SPEC owners had any interference issues with your clutch set-up on a Northstar 5 speed Getrag tranny? I have Specs aluminum flywheel, stage 3 clutch and throwout bearing for the Northstar (all brand new). I get a loud squeaking noise when the clutch is at rest (not engaged) and when...
Score: 634, Size: 12870 bytes
|
9:
|
3.1 TGP ENGINE SWAP INTO FORMULA
(Archive: TD&Q - by Scoobysruvenge, started: 04-14-2009, archived: 2011-05-02 10:44:16 CEST)
The victim 1988 Fiero Formula The culprit39 year old telcom employee The motiveI am new to the blog on this forum, but I regularly read the information listed within these pages as well as others like 60degreev6.com I had a friend in high school who had a black 88 formula 5 speed and in 88 it was...
Score: 631, Size: 348797 bytes
|
10:
|
Supercharged 3800 6 speed manual
(Archive: TD&Q - by 1fatcat, started: 01-01-2011, archived: 2013-03-14 10:10:17 CET)
Another guy whos gonna try. I have most of the major components, still have a lot of the small stuff to get yet.The auto transmission in the pic was all built up and ready to go, then I changed my plans to a 6 speed. So now I'm a bit further from starting than I once was.[This message has been...
Score: 618, Size: 117446 bytes
|
| |
|
Put a PFF Search Box on your Site!