|
|
101:
|
pulled supercharger and lower intake - milkshake all over
(Technical Discussion & Questions - by qwikgta, started: 09-02-2017, last post: 2017-09-03 19:58:28 CEST)
So my local Pick N Pull had its 50% off sale this weekend and I pulled a S3 Supercharger/lower intake/fuel rail w/ injectors off a 2004 GP GTP. Unknown miles but the motor was covered in oil after pulling the SC and lower intake off I noticed that the engine was filled w/ milkshake oil/coolant and...
Score: 633, Size: 65 bytes
|
102:
|
2.8 intake studs
(Technical Discussion & Questions - by lordbg0205, started: 03-28-2017, last post: 2017-04-04 03:13:56 CEST)
Anybody ever replace these with something other than the $32.00 Intake stud from the fiero store. Thats completely insane. Are there two sizes or one. I was able to remove 3, two are the same and the other is about 5mm longer. The fiero store doenst say anything about different lengths. Im sure i...
Score: 633, Size: 27 bytes
|
103:
|
2.5 intake manifold gasket sealant?
(Technical Discussion & Questions - by AsaBergman, started: 09-18-2018, last post: 2018-09-23 19:33:16 CEST)
Hello. Working on fixing the high idle(2500) on my 84 Fiero SE I purchased a month ago. Narrowed it down that it must be throttle body and/or intake gasket so both came off today.I have Fel-Pro intake manifold gasket MS90563, it is a metal gasket covered in a rubber/plastic with raised outlines...
Score: 633, Size: 46 bytes
|
104:
|
2.8 intake manifold
(Technical Discussion & Questions - by Csjag, started: 08-17-2014, last post: 2014-08-17 16:38:05 CEST)
I apologize in advance if this is a stupid question, but what type of wrench or socket is used to remove the upper intake manifold bolts on the 2.8?
Score: 633, Size: 25 bytes
|
105:
|
Intake manifold vacuum vs. Restriction.
(Technical Discussion & Questions - by GTiminator, started: 04-26-2016, last post: 2016-04-26 16:42:25 CEST)
Hi! I've been wondering about intake manifolds. Correct me if I'm wrong here please. If I were to attach a vacuum gauge between the throttle plate and the cylinders (stock fiero plenum) and at red line , WOT, I still had a small vacuum reading, then I could assume the intake up to the point of...
Score: 633, Size: 50 bytes
|
106:
|
New Intake Idea?
(Technical Discussion & Questions - by jaredaltizer, started: 04-07-2018, last post: 2018-04-07 18:28:29 CEST)
Has anyone ever tried making scoops to put on the sail windows (notchback) and directing them into the engine bay through the decklid louvres? I feel like that’d be a pretty good way to cool the engine, a lot more efficient than the tiny intake on the driver’s side. Surely I can’t be the...
Score: 633, Size: 29 bytes
|
107:
|
Iron duke intake manifold bolts
(Technical Discussion & Questions - by Indy-453, started: 03-06-2021, last post: 2021-03-06 18:09:19 CET)
Hi All,I seem to have misplaced the bolts that secure the intake manifold to the cylinder head. The last time saw them was before the head went to the machine shop. Does any one have a list of the sizes I need to replace them? I cant seem to find anything googling around. Thanks
Score: 633, Size: 40 bytes
|
108:
|
dynoing the Trueleo intake years after installation...?
(Technical Discussion & Questions - by lou_dias, started: 05-19-2017, last post: 2017-06-01 06:19:33 CEST)
Has anyone gone back and re-dyno's their cars years after first installing the Trueleo intake?When I first dyno'd my car and the intake was fairly new, I made 249 ft*lbs. 4 years later I was making 220 ft*lbs. 3 years later I was making 203 ft*lbs. Some of this power loss is due to switching to...
Score: 633, Size: 64 bytes
|
109:
|
What to coat an aluminum intake to make it stay new looking?
(Technical Discussion & Questions - by woodyhere, started: 09-14-2013, last post: 2013-09-16 21:53:26 CEST)
I'm switching from an air gap intake to a closed intake. The air gap is impossible to keep clean under the carb. What do you folks think will work best to coat the new intake before it gets used?Thanks, Woody
Score: 633, Size: 70 bytes
|
110:
|
Valve cover and intake external cleaning
(Technical Discussion & Questions - by damittron, started: 06-26-2019, last post: 2019-06-29 23:04:56 CEST)
I have an 87 GT, I finally have it to the point that I would like to start taking it to a few car shows. I spilled some coolant on the intake and valve covers when I was replacing hoses and thermostat. I wiped it off, but it left some kind of sticky residue on them. I am curious what I can use...
Score: 633, Size: 50 bytes
|
| |
|
Put a PFF Search Box on your Site!